Jump to content
SAU Community

Recommended Posts

Modifications as listed below:

ENGINE:

Standard Internals (150,000km)

Spitfire Coilpacks (10,000km)

Custom Coilpack Cover (Nissan Twincam 3000)

No name Forward Facing Plenum with 90mm Throttle Body (Not fitted)

Sabre Alloy Radiator (Not Fitted)

Toshi's Nistune ECU

Dyno Run measured 273HP at 15psi

TURBO:

Garrett GT2876 (10,000km)

Braided Oil and Water Feed

Custom 3" Exhaust (Highflow cat and Cannon) (5,000km)

Standard Exhaust Manifold

Standard Cooler and Piping

No name BOV

DRIVETRAIN:

Standard Gearbox

Single Plate Brass Button Clutch (2,000km)

Lightweight Flywheel (2,000km)

1900KG Pressure Plate (2,000km)

Standard Diff (Very Noisey)

SUSPENSION:

Upper and Lower Rear Adjustable Control Arms

Adjustable Front Lower Control Arms

Competition Whiteline Swaybars

Standard Springs and Shocks

Kumho KU36 235/45R17 Front Tyres (50%)

235/45R17 Sailun Rears (95%)

Starcorp Wheels (17x7)

Wheel alignment setup to oversteer slightly :D

BODY:

Mostly in fairly good condition minus Front Bar (Cracked) and Bonnet (2 Dents).

Headlights are slightly foggy.

INTERIOR:

Standard Interior with a few scratches / cracks here and there.

Steering Wheel getting flakey.

REASON FOR SALE:

This is the thirdtime I've been defected by the EPA with this vehicle. It currently has an outstanding notice for noise. Standard exhaust system SHOULD get you through. I am going to attempt to get the car through epa again.

I am chasing around $10,000. Car is very fun in the dry as when it comes onto boost at about 4.5k revs, hits 15psi hard and spins first and second in the dry (on 34psi tyre pressures). Car has always been serviced every 3,000km with Genuine Nissan Oil and Filters since I've owned it (August 2009). I am now looking at building myself an R33 GTR track car so would be interested in swaps for a good condition gtr shell or complete car with cash your way.

Any enquiries, call Daniel on 0425 441 232. Vehicle located in Blacktown, Sydney. Inspections welcome.

**Pics up soon**

Edited by Stargate
Link to comment
https://www.sau.com.au/forums/topic/346958-fs-93-r33-gtst-turbo-manual-sydney/
Share on other sites

  • 3 weeks later...

PHOTOS:

065kv.th.jpg 066hsh.th.jpg 067re.th.jpg 068of.th.jpg

069u.th.jpg 070xy.th.jpg 072tk.th.jpg 073gk.th.jpg

074la.th.jpg 075j.th.jpg 076by.th.jpg 077bvu.th.jpg

078sqt.th.jpg 079y.th.jpg

UPDATES:

Car has once again passed EPA. Car was returned to standard then back to modified as it sits now (pics above). The sabre alloy radiator has now been fitted. The interior of the car is filthy at the moment - it hasn't been cleaned for about a month. The damage on the front bar is clearly visible.

Edited by Stargate
  • 3 weeks later...

I am chasing around $10,000.

Now asking $9,000. Vehicle will now come with 264 Cams running 8.5mm lift with adjustable gears. Should now make over 300hp.

Needs to go, I've got a GTR sitting in Japan waiting to come over but need the cash for the deposit.

Edited by Stargate
  • 4 weeks later...

Now asking $9,000. Vehicle will now come with 264 Cams running 8.5mm lift with adjustable gears. Should now make over 300hp.

Now asking $8500.

Cams have been installed but has not been tuned. Cams running at standard timing. It breathes alot easier up top and has a nice note at idle.

Swaybars hopefully going in this weekend with the front adjustable control arms.

Inspections welcome.

  • 4 weeks later...

Now asking $8500.

Cams have been installed but has not been tuned. Cams running at standard timing. It breathes alot easier up top and has a nice note at idle.

Swaybars hopefully going in this weekend with the front adjustable control arms.

Inspections welcome.

Trying for 8? Will come with a 19psi actuator, 044 and 2.5L surge tank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...