Rims 8" And 9" Rear.... Some Dish (From An R33 114.3)

[macdoodle69]

Item: Enkei Circulars 8" front (one tyre blown) and 9" rear (2% tread left) ie they need new rubber..... currently have 235 front and 255 on the rear and bald...... note: they have about two inches dish on the rear and one inch dish on the front

Condition: Near new... they just need a polish... no gutter rash... Have been sitting in my Shed for three years unused (when i wrote off one of my old rides)

Location: Adelaide Hills, South Australia

Price: $900 ono .... (would prefer that buyer pays postage at this price as they cost me $2200 second hand a couple of years ago)

Contact: 0432384679 or PM

Will post pics up within a week or so....... Bargain for such Rims at this price!

[takai]

Size and offset would be useful, 17s 18 etc

[takai]

So, how about instead of just bleating bump you actually give some information on the rims...

[macdoodle69]

As per above comment It will be a pleasure to give some more information on them (might i ask what information do you need that is lacking!).... As per above comment..... Rims for sale (all information available is listed!) , they are round, you put tyres on them, your car will look funny without them and you probably would not get too far if you do not have some attached to your vehicle

Dictionairy Defenitions: of Rim(s): Note you may want to take into context the defenition relating to a vehicle!

 [/url]/rɪm/ Show Spelled [rim] Show IPA noun, verb, rimmed, rim·ming. –noun 1. the outer edge, border, margin, or brink of something, esp. of a circular object. 2. any edge, margin, or frame added to or around a central object or area. 3. the outer circle of a wheel, attached to the hub by spokes. 4. a circular strip of metal forming the connection between an automobile wheel and tire, either permanently attached to or removable from the wheel. 5. a drive wheel or flywheel, as on a spinning mule. 6. Basketball . the metal ring from which the net is suspended to form the basket. 7. Journalism . the outer edge of a usually U -shaped copy desk, occupied by the copyreaders. Compare slot ( def. 5 ) . 8. Metallurgy . (in an ingot) an outer layer of metal having a composition different from that of the center.

[macdoodle69]

two comments above... time waster!

note: will try and have pics up soon!

[takai]

As per above comment It will be a pleasure to give some more information on them (might i ask what information do you need that is lacking!).... As per above comment..... Rims for sale (all information available is listed!) , they are round, you put tyres on them, your car will look funny without them and you probably would not get too far if you do not have some attached to your vehicle

How about things like Diameter... are these 16", 20". For all i can tell from your original post know they could be 24" rims. Oh yeah, and offset, just because it fits an R33 tells us absolutely crap all. R33s will fit from +45 through to +20ish without anything hitting.

Besides if you had bothered to read more than 1 post above your inane bumping you would see that i asked for DIAMETER and OFFSET.

[Adam_RSX]

Hey bro, I'm very interested in your Circulars but I really need to know the diameter and offset so I can make make sure they'll fit.

I have cash waiting but I'm going to check out some other wheels tonight so I need to know before then

[macdoodle69]

Hey bro, I'm very interested in your Circulars but I really need to know the diameter and offset so I can make make sure they'll fit.

I have cash waiting but I'm going to check out some other wheels tonight so I need to know before then

They are 18".... Not sure of the offset but i had them on a 33 and they fitted over the brakes no worries..... i also have a set of wheel spaces if you want some extra room.

Give me a buzz on 0401994240 and i will tell you more about them! they are 114.3.... 5 stud.

[takai]

They are 18".... Not sure of the offset but i had them on a 33 and they fitted over the brakes no worries..... i also have a set of wheel spaces if you want some extra room.

Give me a buzz on 0401994240 and i will tell you more about them! they are 114.3.... 5 stud.

Now was that so hard? You could have said that 4 posts ago.

Edited December 19, 2010 by takai

[macdoodle69]

Now was that so hard? You could have said that 4 posts ago.

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol

[Adam_RSX]

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol

Sorry bro, bought other wheels because the dude could tell me what the offset was, needed asap with minimal fuss.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

[takai]

Item: Enkei Circulars 8" front (one tyre blown) and 9" rear (2% tread left) ie they need new rubber..... currently have 235 front and 255 on the rear and bald...... note: they have about two inches dish on the rear and one inch dish on the front

Condition: Near new... they just need a polish... no gutter rash... Have been sitting in my Shed for three years unused (when i wrote off one of my old rides)

Location: Adelaide Hills, South Australia

Price: $900 ono .... (would prefer that buyer pays postage at this price as they cost me $2200 second hand a couple of years ago)

Contact: 0432384679 or PM

Will post pics up within a week or so....... Bargain for such Rims at this price!

Here is your original post.

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol

Please indicate in your original post where you specify the size and offset. It seems your wanking has made you a bit blind.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

Gee im glad that someone has eyes which arnt all cooked up with meth.

[macdoodle69]

Sorry bro, bought other wheels because the dude could tell me what the offset was, needed asap with minimal fuss.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

no problem at all

[macdoodle69]

Here is your original post.

Please indicate in your original post where you specify the size and offset. It seems your wanking has made you a bit blind.

Gee im glad that someone has eyes which arnt all cooked up with meth.

hahhahaa what a come back... you must have a lot of friends no doubt just another pathetic hater.... I wish i was all negative from drugs that i could think up a non intelligent pathetic hating come back and ruin peoples posts, where are you from, are you from Elizabeth or something.... once again all of the information that i have is in the first few posts..... please stop wasting my time although you have made my day........ pathetic manequin... Even if you were interested i would not offload them to you, especially at this price. hehheheheheeehahhaaa i mean hoohoohoeoohoohooooe

[macdoodle69]

any non pathetic haters out their want a decent set of rims for a fraction of the price they cost me second hand let me know.... hope you have a merry christmas

[lolnic]

Wow are you a retard? - you had a potential buyer and were too much of a pole smoking neck Bearded red neck from port Adelaide to respond and get a smooth sale.

Were you meant to be a still born that somehow pulled through only to be dropped on his head multiple times, destined for a life of mediocrity and snoop dog jeans?

Learn not to suck please.

Thank you!

Edited December 21, 2010 by lolnic

[macdoodle69]

Wow are you a retard? - you had a potential buyer and were too much of a pole smoking neck Bearded red neck from port Adelaide to respond and get a smooth sale.

Were you meant to be a still born that somehow pulled through only to be dropped on his head multiple times, destined for a life of mediocrity and snoop dog jeans?

Learn not to suck please.

Thank you!

Charming.... . congrats you have just confirmed some of my above comments about SAU haters / flamers.... and yes i am from port adelaide..... hehehehehehehehheee what a charmer... you will go far