Jump to content
SAU Community

Recommended Posts

my 32 gtst has a t3 turbo, hks low mount manifold, hks gate and has been de-boosted because of it running so lean. I need to do something about the stock ecu and injectors if i want it to see past 240 hp which im on now at 8 psi. ive been told many different things about wolf, stinga and nistune which are what im lookin at.... is it really worth saving for the apexi?

Who is tuning the car?

Go with whatever system they are most comfortable with. As for injectors, anything around 500cc will be sufficient. I would recommend Siemens injectors

This shit has been covered SO MANY TIMES

  • Like 1

C - Red do good work... if you are going to C - Red they wont do Nistune I dont think but ask them what they think is best if you want Jeff to tune it

They have done all the work on my Rb22 = top job

can use 440cc GTR injectors with resistor pack is a common thing too

  • Like 1

C - Red do good work... if you are going to C - Red they wont do Nistune I dont think but ask them what they think is best if you want Jeff to tune it

They have done all the work on my Rb22 = top job

can use 440cc GTR injectors with resistor pack is a common thing too

called C-red today they said they want to put a haltech inside my ecus casing and ill prolly go with sard 550cc injectors tuned for 2200

Ring Hyperdrive or Allstar Garage and go with NIStune and GTR injectors for probably 1/2 of the price of the Haltech and Sards.

Edited by bubba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you confirmed the 2 pin coolant temp sensor on the motor is working properly? I've had a very similar issue when I forgot to plug mine back in many years ago.
    • Ok interesting i guess ill wait till using a manual gauge before making assumptions.
    • Not in any way a logical conclusion. Also, looking at those logs, I struggle to see how that much oil pressure can go away that fast unless you are sucking air into the pickup. Meanwhile the ECU voltage is chucking a huge wobbly which seems to be tied to the throttle position. 100% throttle results in decreasing voltage. It's a mess.
    • So didn't get around to installing a manual oil pressure gauge and then decided to take the car for a cruisey drive to a cars and coffee and brought the laptop along with to get another log using more gears to see if its an oil pressure issue under acceleration or after. this log has 3 gears of WOT where as previous had 2 and the oil pressure dropped once on the brakes, and the same again happens here which is interesting as it shows it can hold oil pressure while under acceleration but once slowing or just the lower RPM after a pull pressure drops. I will be chucking a manual oil pressure gauge on to confirm but so far this makes me feel it is not an electrical issue. Something else i realised is the pressure sensor also is giving temperature information and the temp stays steady the whole time which makes me feel like the sensor itself is showing a true pressure reading.
    • LOL.... fk...   there goes 25K to make 200kW
×
×
  • Create New...