Jump to content
SAU Community

Recommended Posts

hey guys, just wondering if there is someone out there that could give me a bit of advice. i have just recently purchased a s/s turbo manifold for my rb25 as i have put it on (with new manifold gasket) it seems to have a slight leak coming out of it. i started the car and the boost gauge will not boost but the vaccume is still working all intercooler piping is on correctly as far as i can see. it has a slight crack and bang and want rev until half throttle and is really dull, im thinking maybe i have a piping on the wrong way around or missed a breather hose of somewhere as i would say its something to do with A and F ratio as its a blue fuely smoke coming out the exaust possibly or maybe coilpacks have shit them selves im not to sure . appreciate and help cheers tried to explain it the best i could. car is standard and still only th SMIC is on the vehicle was runninng finr before i pulled it apart.

cheers leigh :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/347572-help-rb25det-missing/
Share on other sites

thanks for everyones help very appreciated i not long ago wased the engine bay and i took coil packs off last night to check and the spark plugs were literally under water.... haha dickhead mistake want be doing that again. cheers :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...