Jump to content
SAU Community

Recommended Posts

Not exactly sure if this is the right place so feel free to move.

Car is a non turbo r34 GT four sedan.

Bought a Fujitsubo Legalis R from JustJap and when I tried to fit it, the front half of the cat-back (the one with the mid muffler on it) is roughly 11 inches shorter than the stock one.

I've pm'd a couple of members and no one else has had any problems but Tokyo Taxi has said I might have an exhaust to suit a coupe or have the shorter r32/33 cat converter installed.

I don't think Fujitsubo make a cat-back with dual outlets for the r34 coupes and I don't believe the stock cat-back has been extended to fit a shorter cat, so I'm stumped as to why this exhaust won't fit.

Currently waiting on JustJap to get back to me to confirm if I was sent the right exhaust. This is also the first mod done to the exhaust as far as I know, so everything should still be stock.

If anyone could shed some light, it would be greatly appreciated.

Also, I need the JASMA certificate translated as there is a "2" in a dubious spot. So if anyone can read printed kanji, I can post up the certificate.

thanks

Link to comment
https://www.sau.com.au/forums/topic/347597-r34-gt-four-sedan-exhaust/
Share on other sites

Car is a non turbo r34 GT four sedan.

Well how's that for a rare unit, don't tell me it's a manual too? :)

Bought a Fujitsubo Legalis R from JustJap and when I tried to fit it, the front half of the cat-back (the one with the mid muffler on it) is roughly 11 inches shorter than the stock one.

I had similar trouble trying to work out how to chop an R33 catback system for my R34 GTT sedan. It's got different engine and transmission setup of course, but perhaps there's something useful in these two threads:

Good luck.

Edited by V28VX37

Well how's that for a rare unit, don't tell me it's a manual too? :)

I had similar trouble trying to work out how to chop an R33 catback system for my R34 GTT sedan. It's got different engine and transmission setup of course, but perhaps there's something useful in these two threads:

Good luck.

sorry for the late reply, forum notifications not working. at least i didn't receive an email.

actually, it is manual :P

I think I might have solved the issue but I'll have a read of those two threads when I get home. thanks for the info, buddy. really appreciate it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
×
×
  • Create New...