Jump to content
SAU Community

Recommended Posts

BRAND NEW

STILL IN PACKAGING AND BOX

Specs

4800 Watt 2 Channel High Current Amp

300 watts RMS x 2 @ 4 ohms stereo

600 watts RMS x 2 @ 2 ohms stereo

1200 watts RMS x 2 @ 1 ohm stereo

2400 watts MAX x 2 @ 1 ohm stereo

2400 watts RMS x 1 @ 1 ohms mono

4800 watts MAX x 1 @ 1 ohms mono

High Current Circuitry

PWM MOSFET Power Supply

Double Sided Glass Epoxy Circuit Board

S/N Ratio: >100dB

Frequency Response: 10Hz - 40KHz (+/- 1dB)

Variable 24dB High-pass Crossover: 90Hz - 750Hz

Variable 24dB Lo-pass Crossover: 30Hz - 120Hz

Variable Subsonic Filter: 20Hz to 45Hz

Variable Bass Boost: 0 - 18dB

Variable Bass Boost Frequency: 40Hz - 100Hz

RCA Throughput Connections 4-way Protection

Circuitry: Thermal, Short Circuit, Overload, and DC Offset

Dual Cooling Fans

Blue Lit VU Meters Indicating Output Response

Neon Blue Audiobahn Nameplate

Cobalt Blue Illumination

High Gloss Chrome Plated Finish

Chrome Plated Flame Design

Nickel Plated Block Terminals

Dimensions: 3.5"(H) x 12"(W) x 26.5"(D)

This is a serious piece of sound equipment, nearly 2500 watts RMS 1 channel.

amp1.jpg

amp2.jpg

Brand new - paid over $1000

Selling - $800 + freight

Contact me on 0401 921 380

Leave a sms if I don't pick up as I do shiftwork and have silly hours.

Link to comment
https://www.sau.com.au/forums/topic/347613-audiobahn-competition-amp/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...