Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 4 weeks later...

has anyone tried the Kando Dynamic TD06L2-20g 10cm rear on an rb25 yet?

I have an adapter to run an external gate on the stock manifold and i just want to hit 280rwkw, im thinking the L2 may fall short?

They are about $800 delivered from Kando, I am itching to buy one.

To note, the T67 wheel and 10cm housing OBVIOUSLY has no power restriction (ref Simons results) and results for the td06sl2-20g can be seen on more evos than you can poke a stick at.

Evos generally do not struggle to make 260AWKW from the said turbo on a 10.5cm rear housing and are generally on full song by 4500rpm with epic spool before that also.

The fastest evo I have driven had a td06sl2-20g 10.5cm and 272 cams, it would out rev the motor and had some serious pull from about the 3000rpm range, it had made 280AWKW on that setup and featured in a magazine. Others have made over 300awkw on these turbos with E85.

Might I add we have seen Roy get 260rwkw from an RB20 of all motors on one of these turbos, with VERY acceptable spool. An RB25 would possibly spool one of these better than your average highflow.

I have a feeling that we are fools for overlooking these turbos. I really am looking at grabing one for my 1J and having an all out balistic sub 300rwkw setup. The price of my turbo, manifold and gate will rival the cost of a garrett on its own.

Sorry for the Hijack Simon, Im going to put together a thread some time with links to your own results (for ref to the T67 rear and 10cm housing) along with evo results (for ref of the T67 combined with 20g front on a itty bitty 2L) very soon.

I have ordered a t67 to go with my 6boost and 44mm tial...

Came to this decision over the td06l2 cause of posts on a

Subaru forum where the concensuss was that the L2 was too small for the 2.5l boxer engine

See how I go if it's too laggy ill just swap on a td06l2

They are about $800 delivered from Kando, I am itching to buy one.

To note, the T67 wheel and 10cm housing OBVIOUSLY has no power restriction (ref Simons results) and results for the td06sl2-20g can be seen on more evos than you can poke a stick at.

Evos generally do not struggle to make 260AWKW from the said turbo on a 10.5cm rear housing and are generally on full song by 4500rpm with epic spool before that also.

The fastest evo I have driven had a td06sl2-20g 10.5cm and 272 cams, it would out rev the motor and had some serious pull from about the 3000rpm range, it had made 280AWKW on that setup and featured in a magazine. Others have made over 300awkw on these turbos with E85.

Might I add we have seen Roy get 260rwkw from an RB20 of all motors on one of these turbos, with VERY acceptable spool. An RB25 would possibly spool one of these better than your average highflow.

I have a feeling that we are fools for overlooking these turbos. I really am looking at grabing one for my 1J and having an all out balistic sub 300rwkw setup. The price of my turbo, manifold and gate will rival the cost of a garrett on its own.

Sorry for the Hijack Simon, Im going to put together a thread some time with links to your own results (for ref to the T67 rear and 10cm housing) along with evo results (for ref of the T67 combined with 20g front on a itty bitty 2L) very soon.

Thread is about Kando/Kinugawa/Kamak turbos not my results, so any results you have feel free to stick them up on here :)

I have ordered a t67 to go with my 6boost and 44mm tial...

Came to this decision over the td06l2 cause of posts on a

Subaru forum where the concensuss was that the L2 was too small for the 2.5l boxer engine

See how I go if it's too laggy ill just swap on a td06l2

The TD06SL2 is the same wheel as the T67 Simon is running.

The turbo you noted prior is the exact turbine wheel and exhaust housing.

Simon has made 410rwkw with it, no restriction.

Maybe the Subaru boys were refering to a different wheel, not the SL2.

The TD06SL2 is the same wheel as the T67 Simon is running.

The turbo you noted prior is the exact turbine wheel and exhaust housing.

Simon has made 410rwkw with it, no restriction.

Maybe the Subaru boys were refering to a different wheel, not the SL2.

Yeah the TD06SL2 has the same exhaust wheel and housing as a T67 but with 20g compressor and housing to suit. I would still think a T67 would be better on a RB25 and the SL2 for a RB20

410kw was a little bit of a piss take with correction on... More realistically it makes 390kw on a hub dyno and 360rwkw on a dyno dynamics roller :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...