Jump to content
SAU Community

Kando Dynamics Turbo


SimonR32

Recommended Posts

Ooo you retuned? Why man? Your PT is so close by.... Why retune to suit your stock turbo when you are gonna put a new turbo on soon anyway?

Maybe Ron2 will beat Ron1 to fruition!

Retuned because Jez was good enough to ask me to come over so he can check the tune - re: previously my poor fuel economy, groaning and lack of power at low revs, pausing before taking off - all problems gone now, economy is better (dunno how much yet), even the engine sound is nice and purry and soft unlike before was a groaning louder mofo lacking in sharpness and lowdown-mid range power big time... Measured 182rwkw when I drove in, after a couple hours and 205rwkw, a completely different and very pleasurable car to drive. Its not the power thats the big difference, but the overall feel is way different

Link to comment
Share on other sites

And you know with all this Ron1 Ron2 stuff you and I are gonna have some crazy rivalry going. Gonna need to battle it out at the drags on the regular!

HAHAH I dont even know how to launch man, let alone drive..lol, Sir 5558 should go on soon and you earn the title of Ron (damn, which turbo?) now I guess... :yes:

Link to comment
Share on other sites

Mines going in for a tune Oct 3rd at Hyperdrive. Kando T67 on Hybrid Manifold,750cc inj, 98 oct, stock intake manifold, 3" Custom exhaust, Nistune with stagea image.

Should be firing it up this wkend, everythings fabbed up, just need to bolt the hotside on.

Hoping to crack 400rwhp safely.

Link to comment
Share on other sites

Yep mines also the antisurge, from what research i'd done on them most people lose between 3-6% but then with the added benefits. Only thing im worried about is the noise pissing me off after the noveltys worn off.

Link to comment
Share on other sites

Don't any of you listen to the radio? Once your sick of the noise the radio would block it out for sure.

And sif you would get sick of sounding like your packing something massive. Gentle overtaking with a mean mechanical whistle is farking awesome.

Lith do you still have your 33?

Link to comment
Share on other sites

Mines going in for a tune Oct 3rd at Hyperdrive. Kando T67 on Hybrid Manifold,750cc inj, 98 oct, stock intake manifold, 3" Custom exhaust, Nistune with stagea image.

Should be firing it up this wkend, everythings fabbed up, just need to bolt the hotside on.

Hoping to crack 400rwhp safely.

I'm guessing you'll safely get to about 370rwhp. If you crack 400rwhp, then big up's to you and your tuner :-)

Link to comment
Share on other sites

Don't any of you listen to the radio? Once your sick of the noise the radio would block it out for sure.

That's probably a good reason why I never got sick of it, thinking of it - I always had music playing when I was lurking around, the main times I heard the turbo was when I decided I wanted to.... or the occasionally particularly big hill or other "high load" moment ;)

Lith do you still have your 33?

Yep. Rego on hold, have an RB30 block in the garage and almost acquired an RD28 block just for shxts and giggles. Just watching, pondering, and otherwise helping others make their cars faster.... you'd totally approve of the S14 I have been tuning lately, I think if you drove it you'd juice yourself.

Link to comment
Share on other sites

Yep. Rego on hold, have an RB30 block in the garage and almost acquired an RD28 block just for shxts and giggles. Just watching, pondering, and otherwise helping others make their cars faster.... you'd totally approve of the S14 I have been tuning lately, I think if you drove it you'd juice yourself.

HAHA nice, I think I might need to make a trip your way sooner or later and say Hi.

What turbs is on this 14? Im in the market as the thread tells :P

Link to comment
Share on other sites

Power Enterprise PE1420 which is nicely suited to the unopened SR20DET. On 1bar we were seeing 80-120kph in 2.2s in 3rd, or 3.2s in 4th.... 1bar by 2900rpm in 4th gear.

Ohh I remember you told me bout that one ages back.

I wish you lived local man :(

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...