Jump to content
SAU Community

Recommended Posts

Every day bro, usually at 7am is the best because it's nice and cool and you might be able to slip the tuner cash before the boss comes in so it will be cheaper.

No but in all seriousness, if you don't plan on modifying the car then I would generally say.. Never, for example I have an R34 GTT which was stock for about a year.. Then I upgraded the ecu to an Apexi PFC, intercooler, coilpacks,zorst, upped the stock boost, this required a tune which I have now been driving on for about 3 months.

Basically I would only expect to need another tune if;

A - Something went wrong

B - I decided to upgrade something else (injectors, bigger turbo etc)

C - I decided that the first tune was pussy and I could of stressed the engine another 10hp (which I wouldn't do as I like my safe tune)

Hope this helps, I suppose the other thing to note is if you buy a car which already has an aftermarket ecu then the only thing you would need to question is who tuned it and how good was the tune, and also has anything happened between the last tune and you buying the car.

Cheers,

Steve

Once a car is tuned correctly, than that is it.

It is only when you change something major that you will need a retune.

Yup,

Even when major services are done (according to Nissan) at 40,000 80,000, 100,000 140,000 180,000 200,000 you don't need a retune unless you've done a performance upgrade.

Even changing plugs or coilpacks does not mean that a retune needs to be done.

thanks guys, i wasn't sure, i used to work near RX engineering and the same cars would be back on the dyno every couple of weeks, i wasn't to keen to be doin that. glad its not the case. :)

Power hungry doods with too much money. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...