Jump to content
SAU Community

Recommended Posts

5/10

If you're not a stupid little school kiddy, then yes CRD are a reputable workshop. Do some research like searching these forums for keywords, and head to their website.

Also, 1000 horsepower will be setting you back anything around $50,000 and upwards, so enjoy.

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5596116
Share on other sites

hi , im new here

looking for a shop to grade up my gtr

how about CRD , are they good ?

what do i need to get a 1000 horses ?

can somebody help me ?

I suppose it depends which state you live in. For a 1000 horses it would cost alot of money $50-100 grand. My friend who used to have a 33GTR was running a safe tune of 550 hp, however this was only possible after spending about $20 -30 grand on the engine (Stroker kit, HKS cams, dry sump, and the list goes on and on). I believe each state forum has a thread on reputable workshops.

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5596127
Share on other sites

talking alot about where im from

i know someguy here that send his car to CRD

but hes giving me no info

but i heard it went there

i would like to build my car also

what do u need to run a 8-9 sec 1/4 mile

mine is fully stock

has nothing on it

but would like to beat this guy here

he will be the fastest when his car returns

and he had at78 turbo and checked on the internet and gives a max

of 600-700 hp

so i want to be better than that

help please , or should i deal with the japanese

Lots of sugar cane fuel over that way so he should be set. :whistling:

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5598209
Share on other sites

talking alot about where im from

i know someguy here that send his car to CRD

but hes giving me no info

but i heard it went there

i would like to build my car also

what do u need to run a 8-9 sec 1/4 mile

mine is fully stock

has nothing on it

but would like to beat this guy here

he will be the fastest when his car returns

and he had at78 turbo and checked on the internet and gives a max

of 600-700 hp

so i want to be better than that

help please , or should i deal with the japanese

see my earlier response, what is your budget.

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5598215
Share on other sites

about 50,000 dollars plus airfreight to Paramaribo, Suriname

Lol

talking alot about where im from

i know someguy here that send his car to CRD

but hes giving me no info

but i heard it went there

i would like to build my car also

what do u need to run a 8-9 sec 1/4 mile

mine is fully stock

has nothing on it

but would like to beat this guy here

he will be the fastest when his car returns

and he had at78 turbo and checked on the internet and gives a max

of 600-700 hp

so i want to be better than that

help please , or should i deal with the japanese

Wouldn't happen to be an orange/red R33 that was in Zoom?

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5600966
Share on other sites

well these days $50K USD is roughly equal to $50K AUD so you should get close. your best bet is talk to CRD and ask them what they think of the project. do you plan to send them the whole car or just want an engine built etc?

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5601255
Share on other sites

is that the only shop and throzzle waht do u mean with me being able to make that money here ?

well these days $50K USD is roughly equal to $50K AUD so you should get close. your best bet is talk to CRD and ask them what they think of the project. do you plan to send them the whole car or just want an engine built etc?

Link to comment
https://www.sau.com.au/forums/topic/347878-gtr-upgrade/#findComment-5601770
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...