Jump to content
SAU Community

Recommended Posts

you just said you rarely rev it past 3000rpm

why do you think it must be some torque monster down low? it's a 2 litre straight 6

you will get more torque down low fro ma 4 cylinder because the pistons are bigger, the trade off is that being a 6 cylinder it will rev higher and easier

sell your car now because you have no idea

Edited by mystery_kid

Hey all,

I purchased my r32 only like a month or 2 ago.

The car feels very slow/sluggish until boost kicks in.

I get munched by little yaris/jazz/swifts etc... at the lights (just driving normally)

Boost on car does not kick in until atleast 4-4.5k!

Car has fair bit of work done to it.

CAI

Pod

FMIC

3" TBE

Pon cams

Cam gears

Bigger injectors

Better coilpacks

Z32 AFM

Upgraded fuel pump

Bigger turbo

Nistune ecu (can't remember if that's the correct name)

Few other bits.

I hardly ever floor/race my car as turbo lags and it drinks so much petrol... i'm a GRANNY driver! LOL.

However when i drive normally it's so slow/sluggish... all these cars just overtake me and the ones driving behind me get's frustrated that i'm so slow.

Car does not feel like a straight 6 down low in the rev unless turbo kicks in. Getting overtaken and beaten by 1.3L is a disgrace!

Is this normal or what's up with the car?

Any advice/help would be great.

Thanks guys.

Ok dude I have exactly the same set up as you minus the cams and cam gear and I make 230 rwkw on my rb20det.

The RB is very reluctant to release torque before 3000rpm. Remember...

1) It's a turbo and turbos are designed to make power when they are on boost - NOT ON VACCUM. My boost starts to come on at about 3300 rpm and this is when the car starts to become torquey and fun.

2) Its a tiny displacement 6cyl turbo with less combustion to push more cylinders than any other nissan inline turbo.

With this said however there are a couple of things you can do to combat the lag (apart from getting a tune which I would recommend first as mine is not very laggy even down low)

1) Regap plugs to 0.8mm

2) Buy a performance flywheel

3) Get a proper, sealed and insulated cold air intake...any exposed pods in the engine bay will be sacrificing horses due to heat.

4) Practice launching the car as you get next to no lag off a good launch and this can be a drag launch or an every day town launch

5) Swap in an rb25det (which i personally could never bring myself to do as the rb20 is the sweetest sounding engine in the world)

James

i rarely got past 3k.

so ur saying if i keep all gear changes under 3k without kicking the turbo in then from stat to finish ill always be slower/behind other cars?

even lilttle 1.3,1.5L etcc are faster/ahead of me?

dunnoo. if u guys get what i'm talking about but yer... maybe u needa be in the car to understand..

everyone that sits in my car thinks its slow cos i keep it under 3k and not let the turbo kick in... but boy do they get a surprise when i rev it though..

lollll..

i'll get a retune and fix a few little stuff and see how i go..

=)

Lol rb20s are crap down low with the stock turbo, one making 240kw will be absolutely gutless below 3.5k, I wouldn't be surprised if 1.5L non vtec civics and barinas are faster off the line due to the conservative cams and variable valve timing they have.

You NEED to rev it to go anywhere, I'm talking 4.5k for daily driving otherwise why the hell did you buy it? should have just bought a commodore if you want to drive around at 3k lol. The fuel economy should be fine revving it out with daily driving, my 240kw rb25 gets a beating everyday and it manages 14.5L/100km with stop start peak hour driving so I really can't see how you could be worse than that, you would be lucky to get it below 12L/100km anyway.

So drive it like a skyline or sell it, I don't understand why anyone would buy a skyline and drive it under 3k everyday, it is a puny little 2L six, that is equivalent of a 1.3L 4 cylinder if you take 2 cylinders off it lol, TINY engine with cams and a turbo that suit high revs.

Its a short stroke, low compression engine, I have no doubt that a lighter non turbo eccono box is faster in that rev range, its what they are designed to do, where as the RB20 is designed for revs (short stroke) and boost (Low compression)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...