Jump to content
SAU Community

Recommended Posts

I have for sale my r32 nissan skyline.

I know its coming to christmas and new years and it isnt the best time to sell but who knows there could be a few people out there looking for what ive got on offer.

I am selling due to never really haveing the time to spend on it and i never drive it besides weekends as i have my truck at home which i use everyday for work.

Below i will list in details all the information about the and below that i will list all faults, i am a honest seller and i like to show people what they are looking at instead of wasting others time, as i hate my time being wasted.

*1992 r32 TURBO Nissan Skyline coupe 2 door

*114000 kilometers

*September 2011 registration, 10months

*5 speed manual

*Red paint job which was done by a previous owner, it looks fresh and i would estimate it being around 2 years old maximum

*18inch mags

*Nardi steering wheel

*3inch exhaust

*Aftermarket front strut bar

*Power windows

*Boost guage

*Digital climate control, the control unit isnt working i purchased another and installed it but it was coming up with the same outcome, i now put it down to wiring issue

*Coilover suspension on all four wheels

*Custom black leather roof lining

*Front mount intercooler with 2.5inch intercooler piping

*Apexi air filter (pod)

*Walbro gss342 fuel pump, i installed this 3 weeks ago brand new

*Custom tan leather interior, i was planning on removing this for standard seats as it isnt to my liking but as im selling it might suit buyers with the seats in there

*Fresh service which includes new ngk platinum spark plugs, motul 8100 oil(top of the range), fuel filter, fuel pump, oil filter

*It has a viper alarm which i started to disconnect as previous owner done a dodgy job of a home installation

*Has no leaks or does not use any oil, engine bay looks and is very tidy

Now the following are some things that may need abit of attention, these are all very minor and dont affect the cars performance but should be mentioned in any sale as knowone wants there time wasted

*Front bar has a crack and has been patched up but would need proper rep[airs

*Thrust bearing is abit noisey when clutch is disengaged, but when you put the foot down it goes away also it doesnt affect gear change at all

*Interior is in need of abit of tlc, for example rear parcel tray, door cards, stereo surround would maybe need replacing but arent too bad

*The wiring for the alarm needs to be fixed up as i only started pulling half of it out and the alarm has a remote start feature which requires a couple wires to be tapped in to the ecu which i was going to get a sparky to do as i dont understand about the electrical side of things in cars

*The digital climate control isnt functioning properly, i have purchased another to replace it but after installing it that didnt work either so must be a wiring issue.

*There is no sound system

*Slight engine hestiation untill it warms up, after 3-4minutes of driving the car runs like a dream, it honestly isnt bad at all and its at the slightest, but again no hidden problems i always explain everything to the dime

I have taken into consideration every thing when i set the price, i have owned a r32 before and know very well what they are worth and believe it is set at a decent price, any lower would be giving it away.

My next car i am keen on is a hilux 4x4 or a 4x4 that suits my liking as i might also get a boat soon, i might also consider a v8 if its what im after, so therefore i will be open to sw@ps but only for the right car, i can also add cash on top for a decent 4x4 or will also accept cash my way for a 4x4 which maybe isnt worth as much as my car

The r32 can be viewed at St Clair, which is located in between Blacktown and Penrith

I have a good 10days off over the Christmas break so after this wed or thurs viewing can be organised anytime untill then call me and viewing would probably be after 4PM

The above is a copy and paste from my ebay listing when i have time ill adjust the listing

Im not sure if its allowed but here is a link to it on ebay it has a few pics there i can also send a few more - http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260709951908&ssPageName=STRK:MESELX:IT

My number is 0421735661

Link to comment
https://www.sau.com.au/forums/topic/348006-fs-r32-gtst-sydney-6000/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...