Jump to content
SAU Community

Best Turbo For Power/response/tyre Frying/sliding Action

chocco

By chocco,
in Engines & Forced Induction

 Share

Recommended Posts

chocco Collaborator

chocco

Posted
Posted

Ok since my car is bat shit boring and I wanna get back into sliding again after never owning a 6cyl in my

life Id like some opinions on a best suited turbo for the internally stock rb25det. Basically all I aim for

is a cost effective song engine combination that will aid in me sliding like a happy camper once again.

I WILL be using a stock manifold with an external wastegate mod done sponsored by a fellow member 10WRB but

Im still retarded in picking a turbo that would be best suited for wat I want. I have seen a few posts about

a GTX3076 and I do know a 3076 can make 400hp which would be enough for wat I need so Im here for more extra

input befor I lash out and by something to big or to small and Ill end up in tears.

End of the day I wanna be able to bake tyres, have the reliability without goin over the top and to keep it

looking semi stock.

Cheers

chocco Collaborator

chocco

Posted
  • Author
Posted

Isnt the GT-RS a fairly expensive turbo?

Iv seen a few skyline vary in power from 300 - 400 with these

Id like to keep boost around the 16-18 psi mark if this helps anymore

Lithium Grand Master

Lithium

Posted
Posted

How much are you wanting to spend? If you're baller, then a Garrett GTX3071R or a Borg Warner EFR7064 would be the way to go - if you're middle of the road then a Garrett GT3076R with internal gate, otherwise something like a Kando Dynamics T67 would probably be pretty nifty for a budget option if they carry on behaving as nicely as people are finding them so far.

chocco Collaborator

chocco

Posted
  • Author
Posted

How much are you wanting to spend? If you're baller, then a Garrett GTX3071R or a Borg Warner EFR7064 would be the way to go - if you're middle of the road then a Garrett GT3076R with internal gate, otherwise something like a Kando Dynamics T67 would probably be pretty nifty for a budget option if they carry on behaving as nicely as people are finding them so far.

Dont wanna fork out anymore then 1800-2000 for a turbo. Just rang MTQ and they are saying that the GTX series will be goin for around the 2k mark

so Ill hang out till they have stock and go from there.

Lithium Grand Master

Lithium

Posted
Posted

Dont wanna fork out anymore then 1800-2000 for a turbo. Just rang MTQ and they are saying that the GTX series will be goin for around the 2k mark

so Ill hang out till they have stock and go from there.

Thats why I gave you a range of options, seeing as you didnt specify a price in the first place. Obviously a GT3076R with internal gate is probably the most suitable option for you.

chocco Collaborator

chocco

Posted
  • Author
Posted

Thats why I gave you a range of options, seeing as you didnt specify a price in the first place. Obviously a GT3076R with internal gate is probably the most suitable option for you.

Nah 2k for just the turbo I was talking about haha.

Manifold, gate, dump is all under control already.

Anything with a GT30 core will bolt straight up to wat I can

get my hands on.

I do like that t67 25g kando turbo aswell but I dont like f**kin around with flanges

n shit cause im far to lazy for that.

I will most likely hang out for either the GTX 3071 or the GTX 3076 and go with either or.

Harey Veteran

Harey

Posted
Posted

Just had a gander at the Kando Dynamics T67 25g...

Wow lol

Definitely WOW! Just remember that has an aftermarket manifold, external wastegate and runs E85 fuel.

I think the HKS GT2835 Pro S is the best overall turbo out there for a stock RB25 today, 280-290rwkw on 98 with full boost by 3500rpm. Things might change once these GTX turbos come out. Only time will tell.

chocco Collaborator

chocco

Posted
  • Author
Posted

Definitely WOW! Just remember that has an aftermarket manifold, external wastegate and runs E85 fuel.

I think the HKS GT2835 Pro S is the best overall turbo out there for a stock RB25 today, 280-290rwkw on 98 with full boost by 3500rpm. Things might change once these GTX turbos come out. Only time will tell.

f**kin wow alright haha.

Yeah see I just wanna be able to bolt it on, ram 18pound through the guts, put fuel in it and away I go.

Obviously Iv missed tuning n shit but you get the point. So ill play the waitin game till these GTX turbos

land here and then do a bit of shopping around, might make up for a late xmas present. If the GTX 3071 can flow

10% more then a GT3076 Id like to see the performance of a GTX3076 .82 on the rb25.

SimonR32 Grand Master

SimonR32

Posted
Posted

Nah 2k for just the turbo I was talking about haha.

Manifold, gate, dump is all under control already.

Anything with a GT30 core will bolt straight up to wat I can

get my hands on.

I do like that t67 25g kando turbo aswell but I dont like f**kin around with flanges

n shit cause im far to lazy for that.

I will most likely hang out for either the GTX 3071 or the GTX 3076 and go with either or.

The Kando T67 comes with a T3 flange so you wouldn't have to change anything :)

Harey Veteran

Harey

Posted
Posted

The Kando T67 comes with a T3 flange so you wouldn't have to change anything :)

Except for your exhaust manifold, external wastegate and dump pipe! Or you have to get some custom piping done to run an external wastegate.

Lithium Grand Master

Lithium

Posted
Posted

I think the HKS GT2835 Pro S is the best overall turbo out there for a stock RB25 today, 280-290rwkw on 98 with full boost by 3500rpm. Things might change once these GTX turbos come out. Only time will tell.

I'd absolutely love to experience a GT2835 and a GT3076R back to back, I went with the GT3076R with the view I might end up going to a built motor and IMHO the GT2835 suits a completely unopened RB25 nicely - but not much more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
×
×
  • Create New...