Jump to content
SAU Community

Recommended Posts

Hey guys, Recently I just got a new job, and my employer has told me that I'll have to do a 'medical'. I havn't been able to contact them since, as it's been holidays.

Having never done one before, what would it entail? Height, weight, eye test, lung capacity etc?

More specifically would it involve a drug test of some sort? I'm not into the illegal stuff, just wanting to know what I would be faced with.

Also what are the legalities regarding said testing? Got into a discussion with my friends and they seem to be under the impression that they have to notify me if it involves a drug test or not, but I need some more advice. I'm assuming it's just for legal and insurance purposes?

Any experiences appreciated.

Thanks.

{edit} The job is for a luxury car dealership in Ossy Park, working in spare parts.

Edited by turbo x-trail
Link to comment
https://www.sau.com.au/forums/topic/348588-workplace-medical-for-new-job/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

depends. A alot of places like CarePoint offer pre employment medicals as a package deal, and there are differing levels. If the job is mines or refinery based a drug/alcoholtest, mines health test (lung capacity and hearing test) are in the default list, but as its not mines they might have opted for a cheaper level of testing and just want to make sure you are not going to claim back/leg injuries within the first 6 months.

And no, AFAIK they are not required to warn you of drug/alcohol tests (been on a few sites myself where you get no warning, just a tap on the shoulder). You always have the option of refusing these tests (ie, NO ONE can force you to take a drug or alcohol test against your will uinless its the police for traffic reasons) but a refusal to take the test is almost always viewed in the same way as a positive result...

pretty sure it does include a drug screen. so stay off the hash for a while

Thanks.

Not sure if it's done through Care point or Prime I'll have to check with the employer to be 100% I guess.

I used to work for health for industry.. The test consists of a questionnaire which you would be best to answer correctly.. Also a general fitness test may be involved depending on the job

But you also get lung capacity and stuff like that, they may or may not request a drug test, they'll let u no beforehand etc... And the results can only be disclosed with your consent, contrary to popular belief not that many companies do drug testing

including your weiner, i had some work experience girl watch me piss, was real awkward. I work on a minesite and the medicals include drug test, and we can also get tested walking through the gate. Go to your local hydroponics shop and get that flushing liquid if your that worried

except almost all of the "flushing" agents include a masking agent that sets off alarm bells with pretty much all of the testing protocols used currently.

Yeah all good advice, but I doubt it'd even be a problem at all judging by my lack of "exposure" to old mate mary of late. I'm still just wondering if the job itself will need a drug test included with the medical. I've done my reading, and plain and simple old water flushing out your system coupled with vitamin B and iron does a good job of reducing your urine's pH levels and content. THC is stored in fat cells, so aerobic exercise also helps apparently...

NO EXCERCISE FOR A DAY BEFORE THE TEST

Yes, THC bonds to your fat cells but it is only released when you burn those fat cells.

No strenuous excercise for a day or two before the test, particularly on the morning of the test. Also a good idea to have a steak for breakfast on the morning of the test as the iron and proteins will help.. especially if you are flushing yourself with shitloads of water as they can tell that.

Edited by bubba

Sweet thanks bubba. Judging by the amount that I've been sweating lately (it's been humid as balls in Perth ATM), and given that it's been two weeks since the last pufferoo, I don't think there's gonna be a drama. Plus, im a fairly lean sorta dude and I have a crazy fast metabolism...

Confirmed from my employer that there is indeed a test, done through prime next week so there ya go!

No worries and good luck!

P.S. I've got a mate who blew the test out of the water.. the maximum acceptable amount is 50ppm but he scored so high they had to use another machine (the first machine only read to 500ppm) and he came in at 1950ppm

That is the current record if anyone wants to attempt to beat it :P




  • Similar Content

  • Latest Posts

    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...