Jump to content
SAU Community

R33 Gtr Bits Into R33 Gts-T

Bridgy

By Bridgy,
in South Australia

 Share

Recommended Posts

Bridgy Contributor

Bridgy

Posted
Posted

Hi all,

Question for anyone who might know or has done it, a friend of mine is stripping out an R33 GTR and I've got dibs on the rear swaybar, rear strutbrace, and the underbody bracing they have (goes from the cradle to the middle of the car?) and I'm curious to see if they'll bolt up to my R33 GTS-t for a quick upgrade. Eventually I'll be going to Whiteline/similar gear but in the meantime if it fits, I'll use it. So if anyone has any advice regarding it all fitting, that'd be great :) I'm sure the rear strut brace will fit but I'm not 100% on the other bits!

Link to comment
https://www.sau.com.au/forums/topic/348608-r33-gtr-bits-into-r33-gts-t/
Share on other sites
Pepsinator Experienced

Pepsinator

Posted
Posted

Hi all,

Question for anyone who might know or has done it, a friend of mine is stripping out an R33 GTR and I've got dibs on the rear swaybar, rear strutbrace, and the underbody bracing they have (goes from the cradle to the middle of the car?) and I'm curious to see if they'll bolt up to my R33 GTS-t for a quick upgrade. Eventually I'll be going to Whiteline/similar gear but in the meantime if it fits, I'll use it. So if anyone has any advice regarding it all fitting, that'd be great :) I'm sure the rear strut brace will fit but I'm not 100% on the other bits!

i have a GTR strut brace in mine

other than that i dont know

Krishy Grand Master

Krishy

Posted
Posted

from what i have heard the strut brace won't fit. because of the plenum design but guess if Pierre has got it on his car it must fit. pretty sure everything else should fit fine

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

from what i have heard the strut brace won't fit. because of the plenum design but guess if Pierre has got it on his car it must fit. pretty sure everything else should fit fine

The front strut wont fit like krishy was saying because of the plenum and the rear strut bar fits so I guess thats what Pierre has only the back one and not the front

  • 3 years later...
skycar33 Newbie

skycar33

Posted
Posted

Hey guys, i have an R33 Gts-t thats fairly modified, i was wondering if an R33 GTR front strut brace would fit my Gts-t as i have a Greddy plenum fitted to mine. The GTR ones look more ridgid and sit lower across the engine so i was hoping someone could let me know if they fit up. I looked into it awhile ago but im not sure, googled it and couldn't find any useful info so i made an account here. Any help would be much appreciated.

On Edge Veteran

On Edge

Posted
Posted

Hey guys, i have an R33 Gts-t thats fairly modified, i was wondering if an R33 GTR front strut brace would fimy Gts-t as i have a Greddy plenum fitted to mine. The GTR ones look more ridgid and sit lower across the engine so i was hoping someone could let me know if they fit up. I looked into it awhile ago but im not sure, googled it and couldn't find any useful info so i made an account here. Any help would be much appreciated.

Hi mate, a gtr strut brace will fit up and add some rigidity to the front end. Welcome to the forum

Krishy Grand Master

Krishy

Posted
Posted

As mentioned above, I don't think the GTR strut brace will fit because of the plenum design. GTST sits slightly higher than the GTR. Personally I would go with an aftermarket option which is better suited to a GTST and most of the stuff on the market these days are of a pretty decent quality too.

PS welcome to the forums

On Edge Veteran

On Edge

Posted
Posted

As mentioned above, I don't think the GTR strut brace will fit because of the plenum design. GTST sits slightly higher than the GTR. Personally I would go with an aftermarket option which is better suited to a GTST and most of the stuff on the market these days are of a pretty decent quality too.

PS welcome to the forums

he has a greddy plenum so should be good to go

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
    • dyl33
      Cleaning my wheels 😍

      By dyl33 · Posted

      I steam cleaned my near new set of volk gtc wheels 14 years ago and farrkkked them lol. The clear coat cracked like spider webbing in several areas. Lesson learnt don't do that. 😭
    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      If you don't touch the CAS, then you're fine.
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
×
×
  • Create New...