Jump to content
SAU Community

Recommended Posts

ABS has saved me loads of times on the street esp in the wet.

Really good safety feature when breaking as they dont lock up your brakes which can make your car skid out of control and crash.

Instead of locking up they gradually grab and release the disc brakes.

i said motorkhana not drift.... it can involve lots of hard breaking depending on course layout, not just to get the car sideways

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

i'm still yet to see how ABS would be a disavantage in a motorkhana. outright braking power will still be the same, and you get the advantage of still being able to steer while braking hard without the fear of locking up. up until the point of having a wheel locking up ABS is the same as non-ABS (you can still modulate the braking to be on the point of locking up and not actually have the ABS engage), but once you do lock up then the ABS is better.

good driver will outbrake ABS.

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

If all the conditions are perfect, you're prepared for it and you hit the brakes just strong enough not to lock up then yeah you can beat ABS easy. But as soon as you "slam" on the brakes in a moment of adrenaline, you're f**ked. ABS wins every time in that 'panic' situation because it gives you the option of steering.

I've never seen how ABS can be bad given it waits until a wheel breaks traction before it engages...ABS either kicks in or you're in a slide...

No flatspots on my tyres after DECA...!!!

i have raced both my R31 (no ABS) and my girlfriends R34 (ABS) on the same same and both had the exact same brakes r32 GTR drilled/slotted and R33 4 piston calipers.

there was a noticable difference between the two. The 31 felt like you could break harder before it would lock up a wheel although when it locked up you couldnt turn. The 34 seemed to lockup a little more, but it wasnt as noticable as such because you could still continue 'driving' on turn in.

my experience is for drifting ABS is not going to make a difference at all.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

I cannot do J turns with ABS pluged in in my 33, I may just be crap but my old MR2 (AW11 non ABS) loved them.

And I like the felling of gassing it to the entry of a corner and then mashing the brakes without fear of my crapness flat spoting my $500 tyres which acording to my budget must last 1 year.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

this

Of course a good driver will out brake ABS, I've seen it many times myself - but can you say that in every situation?

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

And even with ABS on, if yuo out-brake it, then sweet. If not, then it's there to lend a hand

and are epically calm. i've done driver training courses, etc that teach you about brake modulation, etc, but i've had animals and people run out in front of me and i can tell you that all of that goes out the window. you instinctively stomp on the brake pedal as hard as you can, and the closer you get the harder you push the pedal, regardless of whether the wheels are locked up or not. the reasoning your brain isn't consulted in these circumstances. it's all well and good to say about braking distances of a good driver in a non ABS car to an average driver with ABS, but that is in a controlled environment when they know they are going to have to brake suddenly. in an emergency situation that comparison doesn't work.

ABS is generally not preferable in a racecar situation, because racecars get into situations not common to road cars, and any decent driver should not need ABS anyway. One easy example is a spin where you want to lock the wheels up, I've head of times when people with ABS equipped cars have lost all braking power because the ABS system was overwhelmed.

There's a reason why the Porsche GT3RS and Noble M600 don't come with ABS.

porsche carrera cup cars use a version of ABS.

as for the ABS being overwhelmed, a lot of people do the wrong thing when braking with ABS once it has kicked in. you will get people who feel the feedback through the pedal so they start lifting off and reapplying the brakes or pumping the brakes. this is the totally wrong thing to do. you are actually better off just keeping your foot buried into the pedal and letting it sort itself out rather the confusing it by altering brake pressure. also i think you may find that some of the braking failures may have been caused by either boiled brake fluid or the brakes overheating and glazing up, and if you get warped rotors and add that to the mix with ABS then you are in for all sorts of dramas.

Unless you are epically well trained, you will jump on the anchors if say, a roo, jumped out in front of ya :)

yeah but how often does a roo jump out in front of you when your 'drifting or having fun with the car' *thread title*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
×
×
  • Create New...