Jump to content
SAU Community

What Have You Done To Your Stagea Lately?


Hanso

Recommended Posts

Cihan is borrowing it, otherwise you guys wouldn't have your cars tuned. You can thank me later. :)

The Innovative is only $200 delivered, no gauge, as the informeter has an analogue input. It can simulate the stock o2 allowing you to stick it in the stock bung, although it should really be a meter or so down the pipe. Cheaper than a replacement stock narrow band o2 sensor too.

Link to comment
Share on other sites

been thinking about buying one for ages, they make another one with a memory card in it so it logs without a laptop then you dump the files

i'm thinking about buying one to make into a temporary setup that can be whacked up the exhaust just to check whats going on (exhaust probe and 12v cigarette lighter plug)

Link to comment
Share on other sites

Finally got my consult cable today. Now I just need to get some software for windows 7.

What software are you after? Ive got a few different consult programs for W7

Link to comment
Share on other sites

What software are you after? Ive got a few different consult programs for W7

i need software for the stagea and maybe some for R32 and S14, but the stagea stuff is the most important.

Link to comment
Share on other sites

It doesn't cost much to get an extra bung welded in pre-cat if you want to run a wideband in addition to your stock O2 sensor. I have additional bungs on both cars.

What's the advantage of running the o2 and the wideband together?

Link to comment
Share on other sites

jethro dont run the o2 lol.

just get the wideband in. and thats all

Wont the ECU have kittens (or throw error codes) if you dont have the O2 sensor plugged in?

Link to comment
Share on other sites

both me and Jethro are running an eManage, it will throw a fault code regardless.

neither of us have the o2 plugged in.. its only there for economy at cruise i think... mine was fudged any..

It wont cause a limp or anything.. it will just throw a code and not try to retune timing..

Link to comment
Share on other sites

What's the advantage of running the o2 and the wideband together?

If you want to see whether the factory O2 sensor is still working in closed loop.

If you have two cars you can buy just one wideband setup rather than one for each car.

If you want to tune the car you won't need to remove the factory O2 sensor.

Link to comment
Share on other sites

If you want to see whether the factory O2 sensor is still working in closed loop.

If you have two cars you can buy just one wideband setup rather than one for each car.

If you want to tune the car you won't need to remove the factory O2 sensor.

i think our o2 actually fiddle with timing itself. everytime Cihan tried tuning mine previously with the o2 plugged in, the tune would just go out of whack on the next run.

i unplugged it, and it was fine from there on - that being said my o2 was f**ked. but i dont think its necessary if your tuning.

Link to comment
Share on other sites

i need software for the stagea and maybe some for R32 and S14, but the stagea stuff is the most important.

there is no vehicle specific software, consult is just the protocol that all nissans between about 1989 - 2002 use. and there is plenty of free software floating around. i've got a few, ECUTalk, Conzult Free, TECU, Nissan Scantech (i think this ones free). If you want to shell out some money you could use Nissan Datascan. even the Nistune software will perform consult operations.

If your looking for a good solid little program to check error codes, look at gauge readouts and some data logging than look at ECUTalk. its a great little program, i used to use it all the time before i got my nistune software licence. As far as i know there aren't any free consult programs that can run active tests, i think the free conzult can but its limited.

Link to comment
Share on other sites

What software are you after? Ive got a few different consult programs for W7

can you pm me with what you have please? my only working free copy (nissan data scan i think) won't work anymore

Link to comment
Share on other sites

It doesn't cost much to get an extra bung welded in pre-cat if you want to run a wideband in addition to your stock O2 sensor. I have additional bungs on both cars.

+1 on this, its exactly what i have done and for a couple of reasons, one so i can remove the wideband and use it on other cars for tuning, and two, you shouldn't be running a wideband where the factory O2 sensor is, it get way too hot for them in that position, a general rule of thumb is about 1meter back from the turbo outlet if you can.

also, most wideband units will have a narrowband simulation output that you can use to hook up to your ecu if you don't want to run the stock one.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yeah, the RB26 is definitely that far off the mark. From a pure technology point of view it is closer to the engines of the 60s than it is to the engines of the last 10 years. There is absolutely nothing special about an RB26 that wasn't present in engines going all the way back to the 60s, except probably the four valve head. The bottom end is just bog standard Japanese stuff. The head is nothing special. Celicas in the 70s were the same thing, in 4cyl 2 valve form. The ITBs are nothing special when you consider that the same Celicas had twin Solexes on them, and so had throttle plates in the exact same place. There's no variable valve timing, no variable inlet manifold, which even other RBs had either before the 26 came out or shortly afterward. The ECU is pretty rude and crude. The only things it has going for it are that the physical structure was pretty bloody tough for a mass produced engine, the twin-turbos and ITBs made for a bit of uniqueness against the competition (and even Toyota were ahead on the twin turbs thing, weren't they?) and the electronic controls and measuring devices (ie, AFMs, CAS, etc) were good enough to make it run well. Oh, and it sounds better than almost anything else, ever. The VR38 is absolutely halfway between the RB generation and the current generation, so it definitely has a massive increase in the sophistication of the electronics, allowing for a lot more dynamic optimisation of mapping. Then there's things like metal treatments and other coatings on things, adoption of variable cam stuff, and a bunch of other little improvements that mean it has to be a better thing than the RB26. But I otherwise agree with you that it is approximately the same thing as a 26. But, skip forward another 10 years from that engine and then the things that I mentioned in previous post come out to play. High compression, massively sophisticated computers, direct injection, clever measuring sensors, etc etc. They are the real difference between trying to make big power with a 26 and trying to make big power with a S/B50/54 (or whatever the preferred BMW engine of the week is).
    • Is the RB26 actually that far off the mark? Honestly from where I'm sitting a VR38DETT is not actually that much more advanced than the RB26. Yes, there is a scavenge pump on the VR38, it's smarter in a number of ways but it's not actually jumping out to me as alien technology. Something like a B58 or V35A-FTS on the other hand has so many surprising little design features that add up to be something that just isn't comparable. 
    • https://www.carsales.com.au/cars/details/2021-nissan-skyline-400r-auto-rv37/SSE-AD-17857548/ Well there you go 
    • Chris won't reply. He doesn't visit the forum much anymore. You can try these guys https://www.facebook.com/autotainment/ They did mine many years ago
×
×
  • Create New...