Jump to content
SAU Community

Recommended Posts

there will be a post lol

maybe ill ebay it. not sure yet!

is it just me or after the shift kit install, the transmission appears to 'slip' less even on take off? im guessing this may assist with fuel economy

Spot on Iain, I'm sure I can feel the same thing.

Dunno about the economy; I'm still not bored with the punch it delivers, maybe next year.

Changed the gearbox yesterday.......but it seems that my timing gremlin has returned!!!!!.... F#<king Car starts and idles but won't rev past 2k without stalling with backfire.

Gearbox did work well for the one drive it worked for.

Edited by Jetwreck

you have to admit it sounds good when it backfires. like a rally car! lol

its probably a wiring issue, the other engine loom is at my place, i rekon we cut off the rear section as it goes to the gearbox, and put the old one on there.

i just had a thought, check the plugs to make sure the pins arent being pushed out of the plus when they are connected.

if we had a working torch we might have seen something that wasnt right

If he keeps buying all the 'awesome' before anyone else gets it, then he can be the gatekeeper! :worship:

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

How are things progressing with your FCon Cam? Have you had a tune done or is it just inline running a base map?

Slow down grasshopper. With the option you are looking at, there is absolutely no need nor reason for "awesome"

True, but that isn't going as well as I'd like, so easy solutions are always good. Never mind, I'll be patient!

How are things progressing with your FCon Cam? Have you had a tune done or is it just inline running a base map?

It was running a slightly modified base map, response was impressive but the economy was not so desirable.

Needs a tune, soon... :ph34r:

Edited by iamhe77

It was running a slightly modified base map, response was impressive but the economy was not so desirable.

Needs a tune, soon... :ph34r:

Cool; I'll be interested to see how it goes, you've got all the supporting mods to make the most of it.:thumbsup:

Made plans to start a big couple of weekends this weekend...

Plan is to fit coilovers and possibly brakes before heading to the local brewery for the AFL Grand Final.

Then Sunday/Monday fit brakes if necessary and the HDi Intercooler (assuming it arrives in time).

Haven't even fit everything that's sitting in the shed and I'm already planning the next major project: speakers!

As of the weekend the speakers on the left hand side seem to be shot, with some kind of weird hissing going on. So I've started searching around for some audio info, and there's a surprising amount on the M35 audio here.

Thinking 6.5 splits in the front, 6" 2 ways in the back, 4ch amp and possibly a sub under the rear floor.

I now have SA rego. Not sure if that is a good or a bad thing. Time to figure out how to get a refund from RTA Victoria.

Thinking 6.5 splits in the front, 6" 2 ways in the back, 4ch amp and possibly a sub under the rear floor.

I was thinking you could fit a sub behind the rear left "wall". Don't get me wrong, I know stuff all about this stereo gear, but it would be nice to hide the sub.

I couldn't work out NSW, never bothered.

I was thinking something like this for the sub: http://www.pioneer.com.au/au/products/25/131/201/TS-WX610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

I couldn't work out NSW, never bothered.

I was thinking something like this for the sub: http://www.pioneer.c...610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

That's a similar solution to the OEM BOSE sub; not terribly priced either, once you take into account amp is included, and no need to build an enclosure.

That's a similar solution to the OEM BOSE sub; not terribly priced either, once you take into account amp is included, and no need to build an enclosure.

I was really keen on that sort of solution but warned away from them pretty quickly - apparently they provide very little bass. Anyone with the stock Bose unit care to comment?

I was thinking something like this for the sub: http://www.pioneer.c...610A/index.html

That way it's all hidden and I still have my boot! :thumbsup:

i found them to but yeah heard they are pretty shite, i also looked at this

http://www.pioneer.com.au/au/products/25/131/201/TS-WX77A/index.html

but apparently they're not much chop in something as big as a wagon for good sound, alrite in utes and stuff or if not really planning on playing loud/ want good quality

and they are too long to fit across the back of the 60 split rear seat :(

Hmmm, my LOLvo mysteriously just died on the way home from a friend's on Saturday night. Coudln't get a flatbed tow truck on short notice (around 9.15pm on a wet night, so retards who can't drive were having accidents because some water fell from the sky :mad::domokun: ), so I ended up flat-towing it back to my friend's.

Anyway, Sunday come around and my mate goes to check the car - it starts and runs. He organises a towie through a mate, and when the truck gets there it runs again and he dirves it onto the truck. Car arrives at my place, and I then proceed to drive it off the truck and into the garage. Tried it again in the arvo today, and it started and ran again. Weird... :blink: :blink: :mellow:

Tomorrow the old man and I will try and figure out if it will start again, and see if we can source the problem. Regardless, I'm gonna be paranoid to drive it on the cruise on Sunday in case it breaks down a long way from home. :(

i found them to but yeah heard they are pretty shite, i also looked at this

http://www.pioneer.com.au/au/products/25/131/201/TS-WX77A/index.html

but apparently they're not much chop in something as big as a wagon for good sound, alrite in utes and stuff or if not really planning on playing loud/ want good quality

and they are too long to fit across the back of the 60 split rear seat :(

Has anyone pulled up parts 84907 and 84906P before? Click for image.

Think there would be enough room to fit a sub like this under there?

The thread I was looking at yesterday said there was a cross brace in the way, but it could be possible?

Apparently the Bose amps fit under the toolkit, so I'm hoping normal aftermarket ones do too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...