Jump to content
SAU Community

What Have You Done To Your Stagea Lately?


Hanso

Recommended Posts

just a suggestion i had a strange whinning noise that i thought was the turbo lacking oil on startup would last a little while and then go away. it was like a nasty queeling noise and eventually i traced it down to the belts on the front of the motor needed some dry lube, WD40 done jack sh*t but helped me find it as its not easy to get ur hand past the clutch fan to lube it up.

dont know if this helps but anythings worth a shot!!!

Thanks for the suggestion mate, I know exactly the noise you're talking about Theo; but this is definitely appears boost related.

Basically as soon as it goes positive manifold pressure; the whine starts. It overlays the normal whine that the turbo has.

Link to comment
Share on other sites

Sounds like the t3 exhaust gasket, I have had a few like that. Could be the front wheel rubbing though.

Need a replacement stock turbo? It could be a better option if you don't want to highflow...

Link to comment
Share on other sites

Sounds like the t3 exhaust gasket, I have had a few like that. Could be the front wheel rubbing though.

Need a replacement stock turbo? It could be a better option if you don't want to highflow...

Hmm, I don't think it's a leak; I'm going to get it on the hoist and stall it up, we should definitely be able to see/hear a leak if there is one.

Frankly, I'd be happy to stay with the stocker; but who's to say how long a second hand one will last? Are you talking about the one you were running on yours in between setups?

Feel free to PM me if you have time mate; it might be a viable option. :thumbsup:

Edited by Daleo
Link to comment
Share on other sites

I don't mind Lainy, I like talking to other people. With the car at my house I should be able to get parts shipped quickly, not taking 2 or 3 months like 'other' members. :P

lol.

Yeah that Lainy guy is a bit of a member... :whistling:

Link to comment
Share on other sites

i got stranded today the damn battery in the key/remote went flat............ unlocked the car with the key and the alarm went off and then tryed to start it but the alarm wouldnt stop so couldn't go anywhere untill i got a new battery in the remote. very convenient when i was at the dog park, luckily a mate lived close by and we ran up to the shops and got a new one.

so for anyone needing a battery the part number is CR3020.

Link to comment
Share on other sites

Hmm, I think I asked that Lainy bloke for a part to be measured ages ago, just after he got his hands on the wreck, actually. Still waiting for a reply...

Bloody Skoda drivers! :rant:

Link to comment
Share on other sites

Oh yeah, I got my clutch replaced on Friday - out with the supposedly heavy duty Exedy, in with a Nismo twin-plate. Getting used to a new clutch and re-acquainting myself with driving a manual at the same time, after roughly 5 weeks of rolling around in only autos.

Link to comment
Share on other sites

Oh yeah, I got my clutch replaced on Friday - out with the supposedly heavy duty Exedy, in with a Nismo twin-plate. Getting used to a new clutch and re-acquainting myself with driving a manual at the same time, after roughly 5 weeks of rolling around in only autos.

Saw your pics Nick; you must've been pissed to find whatever that thing was, that was masquerading as a Heavy Duty Clutch!

I'm assuming that was a workshop job? Good to see you've got what you paid for this time.

Link to comment
Share on other sites

Oh yeah, I got my clutch replaced on Friday - out with the supposedly heavy duty Exedy, in with a Nismo twin-plate. Getting used to a new clutch and re-acquainting myself with driving a manual at the same time, after roughly 5 weeks of rolling around in only autos.

How are you finding the Nismo clutch? I was going to go for the coppermix single plate when i did my manual conversion, ended up being a bit too expensive at the time though.

Link to comment
Share on other sites

Saw your pics Nick; you must've been pissed to find whatever that thing was, that was masquerading as a Heavy Duty Clutch!

I'm assuming that was a workshop job? Good to see you've got what you paid for this time.

Nah, I bought the last clutch myself, Dale, and had Unigroup install it.

Sourced the Nismo myself again, but Unigroup were flat-chat and I wanted my car back, so I got another local mechanic to do it, about 2mins drive and in the same suburb as Unigroup. We deal with them a lot, so I know they do good work too.

Oh, and here's the supposed "heavy duty" Exedy job - less than a year in the car:

IMG_0963.jpg

IMG_0962.jpg

How are you finding the Nismo clutch? I was going to go for the coppermix single plate when i did my manual conversion, ended up being a bit too expensive at the time though.

It's butter-soft, Brian. Loving it so far! And no, it wasn't cheap, but they do come with a matching lightened flywheel which kind of makes up some of the cost.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, yeah, nah. Speakers have a nominal impedance of 8 ohm that looks more like 6.4 ohm when measured. The receiver's amplifiers (all channels) are all rated to 6 ohm (I think, it's been a long time since I cared). The real problem is that many modern class D amps have aggressive protection circuitry that cuts off the fun if they think too much current is being drawn. And with my speakers having series crossovers, as opposed to more typical parallel crossovers, and big TL enclosures, they can certainly dip down to lower impedances at some frequencies and that easily triggers the protection. Pioneer receivers are somewhat famous for it, but even Denon, Onkyo, et al, all have many complaints against them across various models. It only does it when listening to music at high levels. You have to be putting your ears at risk to do it. But sometimes I want to do that. If I was serious about using it as a listening room I'd simply upgrade the amp for the front pair to a nice Rotel or something, and just use the receiver for signal handling and processing - although that would be a bit of a pain in the arse too. Have to switch on more shit, pre-amp volume vs main amp volume, etc etc.
    • yeah pretty much, stopped playing after lightfall, couldnt be bothered with the final shape...  ran that game into the ground for years... bit of a shame.. the  story was awesome. was playing a lot of trials but the hackers became tooo much, ruined the game.  
    • This is why you don't get invited to press events.         Kodi
    • For example, you’ll need this approval if: you’re a car enthusiast looking to import a specialist vehicle or an older car you want to bring your vehicle with you when you move to Australia you manufacture or import special purpose vehicles or a small number of trailers each year.       Tutuapp 9Apps
    • I reckon you are 100% right on the money. The only reason I bought Red Sport instead of the base VR30 is that I am investigating racing it in Production Cars, and they require you to run a (mostly) standard car....therefore knowing exactly what was in the RS spec was important to me and I paid the extra. Other than that, for sure I would have pocketed the $10k and spent them on mods instead. Plus the non-RS models are more likely to have had a nicer life prior. Just a warning though, mods always cost twice as much as they look like they will on paper BTW you should also consider the 400R imports, they are about the same price as a local RS but 5+ years newer. Of course that comes with the usual warnings about finding parts, unhelpful nissan dealers and finding insurance
×
×
  • Create New...