Jump to content
SAU Community

Recommended Posts

Update: they're now claiming that incorrect coolant has caused both buildup in the radiator , and they don't cover warranty for corrosion...?!

Last time I checked, corrosion caused the opposite effect to buildup. Coolants used have been as per their rocommendation since the beginning.

They claimed that straight water came out of the radiator when they received, which we politely explained was due to me having to refill it to limp the car 8km to my mech after the car was towed home from the last Stagea cruise.

It's getting pretty frustrating now, but I'm adamant that we have done nothing wrong. The real pain is not having the beast on the road during the coldest part of the year!

Will update when things progress...

Wrong Coolant eh? What a coincidence...

checked all fluids n gonna give it a revtune tonight to get it read to run the 1/4 mile tomorrow

Good luck with that. I hope you get a good time. Nay, I'm expecting you to get a good time (for a M35 anyways).

checked all fluids n gonna give it a revtune tonight to get it read to run the 1/4 mile tomorrow

I too wish you luck!

I'm going to take a punt. 13.2 at 114mph.

That's my guess.

Good luck buddy, still a few teething problems with mine, I'm not sure I want to hit 200kph on the new disks/pads, that and I had a couple of cooler clamps let go today. I will try to have it ready for the next one. :)

had 4 runs all of em shit haha. first run couldnt stall it up and get it on boost (same problem as every other run) and ran a 12.9 @106 which i was happy with first shot, every other run i missed a gear change or couldnt get it on boost so just went home. stalled it up on my street and it cam on straight away haha oh well

We did 2x Cooling mod (yes Scott, heaps of pics for ya) and 1x plenum spacer today... hub bolts, spacers and wheels tonight or tomorrow

Plenum + spacer

P1000175r.jpg

Cooling Mod

P1000185r.jpg

P1000186r.jpg

Also meshed in that little opening in the timing chain cover

P1000167r.jpg

Why? Well this is what we found between the heads (under the runners) in a V35

P1000172r.jpg

Seems it can make for a nice warm little home for mice :/

had 4 runs all of em shit haha. first run couldnt stall it up and get it on boost (same problem as every other run) and ran a 12.9 @106 which i was happy with first shot, every other run i missed a gear change or couldnt get it on boost so just went home. stalled it up on my street and it cam on straight away haha oh well

Mate, enough with the excuses, lol. There's no need - that's a great time regardless. Good job :cheers:

Today I pulled the passenger side valve cover off. Getting pretty quick at removing the plenum, associated plumbing & wiring (it's my 3rd time afterall :( )

This time there's no sign of oil leaking past the gasket so I must have got it right last time. Afaik that only leaves the banjo oil line on top of the turbo as the culprit. Looks like the turbo's gotta come out again, & that's gonna take a lot longer :/

Sniff...makes me sad.

Edited by Commsman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...