Jump to content
SAU Community

Recommended Posts

Great job but not entirely convinced it's in the correct area of the bonnet. I reckon positioned a bit more on the passenger side and higher would have it quite effective with heat extraction from the turbo area.

Any venting has to be better then none at all

finished venting bonnet today......Wing and Front bar to go!

post-37023-0-73153500-1357888075_thumb.jpg

post-37023-0-46281600-1357888054_thumb.jpg

post-37023-0-78557600-1357888025_thumb.jpg

Whale can has blowhole?

Lol Jokes, it actually looks pretty good, you've more stones than I have to take cutting tools to your bodywork

Whale can has blowhole?

Lol Jokes, it actually looks pretty good, you've more stones than I have to take cutting tools to your bodywork

My bonnet is stuffed anyway.....and there also might be some vented ones getting made very soon so to me it was a no risk!

I would not have done testing on a good bonnet.

so if i'm correct this will be cleared by custom's and getting sent up this week, if it's not being too hopeful...............!!!!!

** also i dont know if it can be viably made for under $1000 each but i'll get the ball rolling once i get my hands on it **

post-83704-0-80273800-1358071066_thumb.jpg

Edited by WAGON_BOY

so if i'm correct this will be cleared by custom's and getting sent up this week, if it's not being too hopeful...............!!!!!

** also i dont know if it can be viably made for under $1000 each but i'll get the ball rolling once i get my hands on it **

nice ;)

Put in the new intercooler today made a diffrence driving around in this crazy heat.

thought it was going to be a prick to install but it went in nce and easy.

HDI Intercooler? Yeah not too hard to do, just need to think about it and lubricate the silicon.

so if i'm correct this will be cleared by custom's and getting sent up this week, if it's not being too hopeful...............!!!!!

** also i dont know if it can be viably made for under $1000 each but i'll get the ball rolling once i get my hands on it **

Do want. Carbon or Fibreglass?

Pulled the head off my Stag on the weekend. Did the head gasket. Not sure what happened. It's an RS4(S?) with 103,000km on the odometer, but I think it's been wound back somehow.

Blew the gasket on cylinder 6 into both the oil and water galleries, and it was starting to let go on cylinder 5.

As soon as the temp gauge started to rise, I pulled over and had it towed. Fingers crossed the bearings are fine, as the oil is quite milky.

Planning to have it back together this weekend coming providing parts and head machining aren't delayed!

These arrived at work on Friday for me and I've got myself booked in for this coming Friday to get them fitted

902d63265dd111e2be0322000a9f38f1_7.jpg

Wrapped in a set of these (They're Falkens, to add some fuel to the Nitto vs Falkens debate :P)

IMG_20121214_092522.JPG

At the same time I'm getting the coilovers fitted AND the bushings kit from the group by. Basically, its christmas.

Oh, and I played the 'jump start your car because the battery is too flat to charge' game on the weekend too.

That must make it Adelaide cruise time! There are a few people keen for a Feb cruise.

I did really exciting things to my car: I retuned the throttle. *YAWN* Feels better though.

Wrapped in a set of these (They're Falkens, to add some fuel to the Nitto vs Falkens debate :P)

IMG_20121214_092522.JPG

At the same time I'm getting the coilovers fitted AND the bushings kit from the group by. Basically, its christmas.

Oh, and I played the 'jump start your car because the battery is too flat to charge' game on the weekend too.

Falkens? I read somewhere in a thread that they're pretty good.

Nice wheels btw, :woot:

Finally got an alignment!

Toe was massively out, even on the rear (which wasn't altered at all)

and the place i used actually found more things wrong than when i got the pedders check, so i doubt i'll back there in a hurry

most annoyingly tho, they didn't touch the new adjustable bushes and said there is something wrong with the caster bushes because they aren't stock

good news is that caster is up to about 4.5-5mm and its sitting on 1.5-2° of camber in the front

Will have to give them a call about the superpro bushes and see what they think is wrong

Finally got an alignment!

Toe was massively out, even on the rear (which wasn't altered at all)

and the place i used actually found more things wrong than when i got the pedders check, so i doubt i'll back there in a hurry

most annoyingly tho, they didn't touch the new adjustable bushes and said there is something wrong with the caster bushes because they aren't stock

good news is that caster is up to about 4.5-5mm and its sitting on 1.5-2° of camber in the front

Will have to give them a call about the superpro bushes and see what they think is wrong

Who did u go to?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...