What Have You Done To Your Stagea Lately?

[MikeH]

that's about the standard boost mate....is the boost controller turned on? generally it would be set between 12 and 14psi for a standard turbo

oh really? I was told by a few people that standard they are meant to be set at about 7psi and 10psi is the 'safe' boost to run daily on stock turbo. Boost controller is turned on, but i haven't tried playing with it yet. Need to download and read the manual

[Sisbro666]

He's pulln ya leg

[MikeH]

He's pulln ya leg

And here I was hoping these forums would be different to Ozhonda

[Duncan]

Not leg pulling, I was just wrong.... I was thinking of rb26 not 25

[MikeH]

Not leg pulling, I was just wrong.... I was thinking of rb26 not 25

All good mate.

[Brick]

Got an EMu this week. now just need time and a bit more money to get it in with a few other last parts and the car is done

[rb26stagea]

Blowoff valve and wiring loom for ignition coils arrived today! Wuhoo! Off to mech on Friday to have it all fitted up, then as soon as my tuner has time, we'll give it the 5th "final tune", and everything will be awesome (probably wishful thinking given the epic issues, but you gotta stay positive, yeah?)...

[Daleo]

Good luck with it; hope all goes well!

[rb26stagea]

Rest assured, there'll be an update, whichever way it blows....er: goes...

[Trex]

Sounds like it should all be sorted it's good you got back on the horse, it can be really detering when these things happen.

I remember someone asking for a picture of my seat because we were bidding against each other months ago. So here it is.

[Dunc]

Damn those seats look good!

[Reprieve]

agree ^ man that's a sexy seat!

[C34S2STAG]

Wow cool seat!

Update on our stag. We put a new fuel pump in (walbro) then started getting a hesitation on take off and light throttle. Checked voltage at the pump on idle and revs. 9 volts!! Haha didn't really want to run a new power cable etc so at first I was like il try earthing the fuel pump direct to the chassis and see what happens.

So did that and check voltage. 12.2 volts. Sweet! Went for a drive and the hesitation was gone!! Yay

Car went on the dyno again and made 180kws at all four wheels. Goes much harder now, wow haha

[Duncan]

good to hear that it was a simple fix, but you need to be a little careful with just putting it straight to the chassis. Does the fuel pump still turn off after a few seconds when you turn the ignition on (but do not start the car?)

In a lot of these systems the ECU uses the earth to turn off the fuel pump when the ignition is on but the car does not start.

If your fuel pump does not turn off (may be hard to hear), you need to add a relay where pin 85 goes to the original ECU earth to the fuel pump (12v can come from any ignition switched source to pin 86). Then connect the old fuel pump earth to pin 30 and pin 87 then to the chassis earth.

[MikeH]

Cusco brake stopper:

Apexi pod, actually made induction noise a lot louder than I expected. Sounds great though

Bought some inspiration:

[Global_Warmer]

What have I done to my Stagea lately??

Nipped in to town to do some shopping!

All this gear in the car and still could of beat any Commondore!!!

Sent from my HTC One XL using Tapatalk 2

[joshm35]

What have I done to my Stagea lately??

Nipped in to town to do some shopping!

All this gear in the car and still could of beat any Commondore!!!

Sent from my HTC One XL using Tapatalk 2

hay

[Global_Warmer]

hay

Hay Wot?

Sent from my HTC One XL using Tapatalk 2

[R33huntme]

What have I done to my Stagea lately?? Nipped in to town to do some shopping! All this gear in the car and still could of beat any Commondore!!! Sent from my HTC One XL using Tapatalk 2

That's quite a bit of stuff is that shopping for a couple of months!

[pipster11]

Gktech open ended wheel nuts on order, once they arrive I'll start playing with my spacers :-)

Managed to pick up two pairs of their 15-30mm spacers for $150

Should be able to fit my kakimotos over the front brakes now