Jump to content
SAU Community

Recommended Posts

good to hear that it was a simple fix, but you need to be a little careful with just putting it straight to the chassis. Does the fuel pump still turn off after a few seconds when you turn the ignition on (but do not start the car?)

In a lot of these systems the ECU uses the earth to turn off the fuel pump when the ignition is on but the car does not start.

If your fuel pump does not turn off (may be hard to hear), you need to add a relay where pin 85 goes to the original ECU earth to the fuel pump (12v can come from any ignition switched source to pin 86). Then connect the old fuel pump earth to pin 30 and pin 87 then to the chassis earth.

Yeah made sure it turned off! It's all good, love an easy fix!

Bought R33 brake calipers, an new K&N pod and heat shield, autometer carbon oil pressure and boost vacuum gauges, clean the AFM wire thingy ( yes i know, a very technical term) and fired a set of Pirellis after only 4k of driving. I love my new Stagea.........

Fitted a set of XYZ coilovers and adjusted the height to something a little more front bar friendly and dropped to car off at the panel beaters to have the dolphin bar replaced with an Autech one.

So... The Stagea got picked up by my mech yesterday, still running on 5 cylinders (not surprising, since I've barely looked at it in the las couple of weeks), and in it went for the new BOV and ignition coil loom.

Got a call from the mech when he was taking the car back to mine, letting me know it was still running rough, but he was going to give it a good run back to my place to see if that could defoul the plugs (They are only about 25km old). Turns out the Highway was bumper-to-bumper, so I got another call after he'd dropped the car off letting me know it was running worse...

Apparently he was going to scoot over to my place today to put a fresh set of plugs in it, but either way I'll take it for a drive in the morning and see what happens. It's booked in for tuning on Wednesday, and I am non-negotiable about having it runnnning cleanly before then.

14 months and counting now...

Watch this space...

Not sure if the C34 guys know about these, but at such a cheap price; what could possibly go wrong?

http://www.gktech.com/index.php/r32-r33-r34-gtr-roll-center-adjusters.html

img_0722.jpg

Just took mine for a small 200-odd km road trip, loaded up with about 200kg of tools and my father-in-law (nuthin' suss...). I'd forgotten how much grip this thing has, I smoked the gorge about half-way through the trip, much to the chagrin of the a-hole who'd spent the better part of 40km wedged up my exhaust pipe.

There may also have been a minor drift around a downhill, off-camber 55km/h corner.

Father-in-law now wants an M35, although he did ask me if I'd noticed how much the rear end looks like a Volvo...

Edited by Hertz Donut

Not sure if the C34 guys know about these, but at such a cheap price; what could possibly go wrong?

http://www.gktech.com/index.php/r32-r33-r34-gtr-roll-center-adjusters.html

Posted Image

Looks interesting, I wonder how much of an improvement they make? So the stock joint bolt up to these, bit like a spacer?

Looks interesting, I wonder how much of an improvement they make? So the stock joint bolt up to these, bit like a spacer?

I've used roll centre adjusters before, they make quite a difference on lowered cars; correcting geometry of the lower control arm.

Those are seriously cheap.

So... The Stagea got picked up by my mech yesterday, still running on 5 cylinders (not surprising, since I've barely looked at it in the las couple of weeks), and in it went for the new BOV and ignition coil loom.

Got a call from the mech when he was taking the car back to mine, letting me know it was still running rough, but he was going to give it a good run back to my place to see if that could defoul the plugs (They are only about 25km old). Turns out the Highway was bumper-to-bumper, so I got another call after he'd dropped the car off letting me know it was running worse...

Apparently he was going to scoot over to my place today to put a fresh set of plugs in it, but either way I'll take it for a drive in the morning and see what happens. It's booked in for tuning on Wednesday, and I am non-negotiable about having it runnnning cleanly before then.

14 months and counting now...

Watch this space...

Are you still using the same Sydney workshop that you were using ages ago, Micah - the one on the Northern Beaches? From your continued experiences, it might be time to make a change...

Are you still using the same Sydney workshop that you were using ages ago, Micah - the one on the Northern Beaches? From your continued experiences, it might be time to make a change...

No. As most of us know, he shut up shop and scooted: still owed me $1000 at the time.

I've been using a Gold Coast based workshop for the last few years, but I guess I'm on the hunt for a better one...

Just confirmed I got Wednesday off work, so I can be at the dyno to investigate any issues that make themselcves known this time. My fingers are crossed this time - without jinxing it, theres very little left that can fail now: I've replaced almost everything! Lol!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...