Jump to content
SAU Community

Recommended Posts

Stupid question. Isn't it drivable just by disconnecting it ? Just to make it home and not have to call a truck

sometimes it may enter limp mode, but for my experience, my car kept stall.

Edited by YangLIU

Stupid question. Isn't it drivable just by disconnecting it ? Just to make it home and not have to call a truck

sometimes it may enter limp mode, but for my experience, my car kept stall.

yeah I noticed the fault counter at home and yeah I know that goes into fault mode when taken out of the connector.

towing is free. the insurance company will pay

sometimes it may enter limp mode, but for my experience, my car kept stall.

I was able to drive mine with a blown AFM on all three occasions it happened to me, one trip I was about 100km from home and it got there. I don't know why some cars would be able to be driven whilst some others aren't. Just another M35 mystery.

HDI intercooler ready to be fitte, front lower arm bushes to be pressed in, waiting for m35rv1 turbo and 14psi actuator, new rocker cover gaskets and Lfr7aix spark plugs, b&m trans cooler fitted, banjo restrictors drilled out. Still waiting for mishimoto coolant hoses, nismo thermostat and am performance dump. Cannot wait to drive this thingpost-142568-0-31293300-1460779832_thumb.jpgpost-142568-0-74675000-1460779902_thumb.jpgpost-142568-0-63248700-1460780039_thumb.jpgpost-142568-0-61998100-1460780173_thumb.jpg

What can you read with that unit? And does it work?

Havnt started the car yet as i havnt fitted turbo, but with ignition on i can cycle through rpm, throttle %, boost, water temp, oil temp, oil pressure, injector duty cycle and vehicle speed

Finally found the last pieces to my M35 Stagea 'E' trim code swap. Next will be the head lining in tan.

Not hassling you for it, and I know colours are a subjective thing, but why do you want to swap to beige? My one regret with my Stag is the interior colour, especially since I have kids. It's depressing watching the seats change from sparkling clean to dirty over time, at least the dark interiors hide it.

Edited by Hertz Donut

The lower section of my car is dark (charcoal & black except seats), the top 1/2 is beige/tqn (whatever you want to call it) as it was originally light grey (so this colour is actually darker than what i had). And as i got the burnt orange 350z seats for a steal ($250 - good luck finding a set at this price) i actually dont mind the colour so trying to match to them. edf0e43b45f642ec6ab5053d8cd8f2a6.jpg

As you can see the lower is darker and for a car that wits in the garage 90% of the time doesnt get kiddy grime.

As with all cars they are for individuals and your post is appreciated. Beige interior os so much better than the light grey thats for sure. Oh and i am 1 of 2 m35s (that i am aware of ) who have the rear roof panel not molested by 3 child restraints.

00a026e3c1d4d3cfaf160564cfeaf99f.jpg

Edited by joshm35

Ah, forgot you had the Z seats, makes more sense now. The 2-tone effect will actually look pretty cool I reckon, almost custom.

...

Oh lawd, I just had flashbacks to all-white vinyl interiors from the late '90s/early '00s. I wish I hadn't just eaten dinner...

Yeah... sucks they wernt black but the orange is just as nice. Kept all the lower 1/2 black and soon to be completed with black carpet. I was just testing the black headlining but going with a tan colour (cant find a m35 headliner in tan as they all have sunroofs) and i dont have the sunroofs..... yet ;)

Also i have noticed i have a different steering wheel then everone else. Any clue as to what its off?

It's not just the steering wheel, your whole car is pointing the wrong way!

Also i have noticed i have a different steering wheel then everone else. Any clue as to what its off?

Steering wheel is from a Y50 Fuga, something a bit different, nice one!

Also i have noticed i have a different steering wheel then everone else. Any clue as to what its off?

Also have a look at the Infinity M35, you might be able to get the cruise switches from the USA.

Yeah... sucks they wernt black but the orange is just as nice. Kept all the lower 1/2 black and soon to be completed with black carpet. I was just testing the black headlining but going with a tan colour (cant find a m35 headliner in tan as they all have sunroofs) and i dont have the sunroofs..... yet ;)

I'd love a black head lining. That would look great.

You doing it yourself Josh ?

Pretty difficult upholstery job there.

I'd keep it to only 2 colours .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
×
×
  • Create New...