What Have You Done To Your Stagea Lately?

[NicPM35]

On 21/01/2018 at 7:11 PM, KiwiRS4T said:

Looking good! So what offsets work on the 8 in rims? Different front and rear?

The width is actually 8.5", and the offset is 45. they sit nicely just a smidge behind the guards. The 235/30 tyres are a bit too slim for my liking, so probably will swap to 235/35 down the track. 

[datmoo]

Turned my M35 into a Datsun 1600!

[Sack87]

Replaced cam cover seals, spark plug tube seals, new PCV and painted intake and intake manifold wrinkle black. 

Edited January 28, 2018 by Sack87

[Long and low]

Connected my phone to the factory Bluetooth.  Phone controls on the wheel work too. Noticed the voice recognition understands English but you need to know the names of the menus.......  Anyone got more experience? 

[Long and low]

My car was keyed and tyres let down. I am insured so it's getting a full respray. I will be doing a few mods and surprises while it's off the road. 

Watch this space

[Caleb_M35]

Installed MCA Street Performance Series coilovers, Driftworks front upper camber arms (approx. -6 deg in front and -5 deg in rear), Garson Deep Racing Ryugi wheels on the front in 18x11 -22 (have to re-lip the rears from 18x12.5 -22 to the same specs as the front before I can run them), painted brake callipers and installed a sub and amp. Nothing too major but its a start on my static VIP-inspired build. 

Edited March 19, 2018 by Caleb_M35

[oxford1327]

Brake upgrade on the front completed, they're only little 8pots, 4pots to go on the rears once bracketry is sorted for diameter and offset. 

And finally able to get new rims fitted now that brakes are done and allow clearances 

[TukeH]

 Finaly I got fmic installed. I did not notice the difference

Later have to buy aluminium pipes to.

 

Also I bought bc racing shock cover bags

[Long and low]

I had my car on the hoist and took the opportunity to get a picture of my exhaust.  The x pipe was taken out to help reduce drone. I need to sound deaden the boot too. It's 2" 

[KiwiRS4T]

On 4/3/2018 at 5:19 AM, TukeH said:

 Finaly I got fmic installed. I did not notice the difference

Later have to buy aluminium pipes to.

 

Also I bought bc racing shock cover bags

You need to up the boost to 10 psi

[admS15]

You need to up the boost by 10 psi

Fixed. M35's run around 14psi stock.

[Long and low]

Making some progress with my headlights today

[West]

3 minutes ago, Long and low said:

Making some progress with my headlights today

Sickkkkkkkkkkkkkkk! 

Where do you get those running light?

[Long and low]

It's a massive job. All parts are from aliexpress 

20180412_160835.mp4

[West]

2 hours ago, Long and low said:

It's a massive job. All parts are from aliexpress 

20180412_160835.mp4

That's too extreme but i like it. Well done.

[Long and low]

18 minutes ago, West said:

That's too extreme but i like it. Well done.

That's just for use while the cars on show. I'm not going to use on the streets

[Tastagea]

18 hours ago, Long and low said:

Making some progress with my headlights today

what will the final poduct look like? looks like they would give off a fair bit more lumens than the stock ones!

[Long and low]

Will look much like this just tidied up. I have to clean up the clear lenses to go over the front to seal it. The light bar is custom from my company I had. They are about 4 times brighter than the stock high beam. The strip across the top is daytime running light and indicator in one. The halos are park lights so will come on with the auto headlights. The flashing lights in the sides are just for when the cars on show. 

It is very hard to recreate the mounting points for the stock HID as I have cut 2 of the 3 off to fit the light bar

[West]

18 minutes ago, Long and low said:

Will look much like this just tidied up. I have to clean up the clear lenses to go over the front to seal it. The light bar is custom from my company I had. They are about 4 times brighter than the stock high beam. The strip across the top is daytime running light and indicator in one. The halos are park lights so will come on with the auto headlights. The flashing lights in the sides are just for when the cars on show. 

It is very hard to recreate the mounting points for the stock HID as I have cut 2 of the 3 off to fit the light bar

Any link to where to get that day time running light? Looks like its made out of silicon?

[Long and low]

Aliexpress 
http://s.aliexpress.com/vmYN7BFJ?fromSns=Copy 

Had to cut holes into the panel to wrought the light. It's too long and to attach you need to buy double sided tape and I drilled holes through to use some wire to make sure it doesn't come off.