Jump to content
SAU Community

What Have You Done To Your Stagea Lately?


Hanso

Recommended Posts

So I haven’t posted in a while here but I picked up a Takeros kit which needed a bit of work and paint and it’s slowly making its way to being done.

its had the fibreglassing work done thanks to one of the awesome dudes at my work, I just need to bog it from the front and sand everything down and prep for paint.

I will need to remove my tow bar which is a bummer but not the end of the world.

89A52608-097A-4B70-93F4-81FD1A3511BB.thumb.jpeg.444f4cda736c3eb45def992f8b0966fc.jpeg 

6EC7C5B3-3233-4E7D-845E-ADCF417EB0C8.thumb.jpeg.443f5178a0f80fcb8cbc7fa688b22c08.jpeg1F85272A-6902-40FC-BDED-865C0CA93C38.thumb.jpeg.5394924fdf418fc931922f904520368d.jpeg

  • Like 1
Link to comment
Share on other sites

Hi all, haven't posted in awhile, wagon been good, have horn/clockspring issue to fix tho... just saying hi. See lot of Stageas around Hawkes Bay now....

 

was doing the long distance relationship thing for awhile so car had good workout over Taupo rd.... some night shots... Cheers

 

 

IMG_0063.JPG

IMG_0064.JPG

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

Finally got around to kind of fitting up my rear wheels for now (Garson Ryugi Deep Racing 18"x12.5" -22). Adjusted suspension height and damper and smashed guards out with a guard roller, phone books and a jack handle until I either order bolt-on flares or bite the bullet and begin a widebody...

IMG_6413.JPG

  • Like 2
Link to comment
Share on other sites

  • 1 month later...

New wheels and tyres ?

BBS Lm replica 8,5x19 et45 and 25mm Bolt spacers

235/40R19

Weekend work. change rear upper control arm and next week wheel aligment then I can get better pictures

DSC_0084.JPG

Edited by TukeH
Tyre size forgotten
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Just sold the black PNM35, so we're back to a one-Stagea, one-Leaf family. :( It drove better than the silver one (had no options so was lighter, had hard bushes, lowered, better brakes and may have been shift-kitted) but since it didn't have a towbar or centre-rear 3-point seatbelt it was voted off the Island.

It served me well though, I bought it because I was doing a 600km round trip every week for work last year, and the mileage allowance I was paid meant it was basically free, so anything I got when I sold it was a bonus. Now I just have to convince my wife we should use the proceed to fit new bushes, suspension, brakes and a shift kit to the silver car. :P 

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

Evo 8 seats finally in. Stripped almost every bolt getting the old rails off and had to drill 2 of them out and re-tap (shhh don't tell). 

Sits much lower than stock, and wouldn't recommend if you're a big person. They are quite snug on my ass. 

Now to figure out the seat airbag delete... 

20180821_101123_001.jpg

  • Like 4
Link to comment
Share on other sites

On 8/21/2018 at 10:18 AM, NicPM35 said:

Evo 8 seats finally in. Stripped almost every bolt getting the old rails off and had to drill 2 of them out and re-tap (shhh don't tell). 

Sits much lower than stock, and wouldn't recommend if you're a big person. They are quite snug on my ass. 

Now to figure out the seat airbag delete... 

20180821_101123_001.jpg

You want to solder a 2.2 ohm resistor into the wiring behind the plug  on the harness; that's the value of a seat airbag.

Poking it into the ins of the plug won't work, needs to be soldered into the wiring.

Seats look great in there.

Link to comment
Share on other sites

On 9/2/2018 at 11:41 AM, Daleo said:

You want to solder a 2.2 ohm resistor into the wiring behind the plug  on the harness; that's the value of a seat airbag.

Poking it into the ins of the plug won't work, needs to be soldered into the wiring.

Seats look great in there.

Cheers, I've figured that bit out.

Totally voiding any insurance that I'm paying for and my safety probably too, but hey they look good right?!

Link to comment
Share on other sites

  • 3 weeks later...

Finaly had time to take dp Off. 

I have to make new flange because I bought

Wrong ☹️ 

Just 2hours to remove dp and make flange and I did not lower the trans

 Without the induction heater one bolt would not have left off

IMG-20180928-WA0007.jpeg

IMG-20180928-WA0005.jpeg

IMG-20180928-WA0009.jpeg

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...