Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Rust be gone!  Except they keep finding more 🙃.    It's all getting done properly, cutting out and welding in metal, no cover ups here.  They normally work on Fiats and Alfa's, so they know rust 😆  

After 10 years on the street. It will have an easy life in a dry garage.  I only have on street parking but I've found a lockup 10 mins walk away at very reasonable price.  

PXL_20201117_212135653.jpg

PXL_20201117_212022146.jpg

PXL_20201117_212019393.jpg

Had an exiting run against a road bike, dumped it hard into 3rd gear as I pulled away & bang. I now have lots of little bits of 3rd gear, so I've done something to my Stagea but its not an improvement. Now I have a choice, a brand new 5 speed Nissan box for $3400 or a PPG dog box for $12000. Any suggestions?

lol, not ideal as an improvement.....are you making enough power to make it worth upgrading the gearset?

a stronger box can make it a pain if you drive it daily, unless you are sticking with a helical gearset.

Yeh its a Maatouks Racing built motor running 526hp at the wheels on 98, I was almost ready to get a flex fuel tune & turn it up to about 700 - 800. I think I need to upgrade the box as 3rd gear is the weak link so probably as you mentioned a 1st to 4th helical cut dog box will be needed. It will save down time & money in the long run. It is my daily apart from road bikes & I don't think I could put up with an auto or justify a sequential.$22K

Today's project was to develop and tack up a 4inch metal intake pipe to suit the new turbo, coming along nicely, once I've positioned the weld in bung for catch can bypass line she'll be ready to tig together 

DSC_0454.JPG

DSC_0453.JPG

DSC_0450.JPG

DSC_0449.JPG

DSC_0445.JPG

DSC_0447.JPG

DSC_0439.JPG

DSC_0437.JPG

DSC_0435.JPG

On 20/11/2020 at 7:37 AM, TMLP said:

Yeh its a Maatouks Racing built motor running 526hp at the wheels on 98, I was almost ready to get a flex fuel tune & turn it up to about 700 - 800. I think I need to upgrade the box as 3rd gear is the weak link so probably as you mentioned a 1st to 4th helical cut dog box will be needed. It will save down time & money in the long run. It is my daily apart from road bikes & I don't think I could put up with an auto or justify a sequential.$22K

hmm that's almost exactly the same as mine on 98, 395akwkw. Hopefully I'll have more luck with the box. I guess it depends how much you need to run daily, for me a box that is easy to live with is a priority (ie, factory, or at least a helical/synchro box)

All reassembled and airbox partition modified to suit and refitted, kinda sneakily looks like it's factory, the satin black hides its dimensions I reckon, now the wait for 2 weeks till tuning day😔

DSC_0485.JPG

DSC_0484.JPG

  • 1 month later...
On 11/22/2020 at 8:58 PM, Duncan said:

hmm that's almost exactly the same as mine on 98, 395akwkw. Hopefully I'll have more luck with the box. I guess it depends how much you need to run daily, for me a box that is easy to live with is a priority (ie, factory, or at least a helical/synchro box)

Just be gentle into 3rd gear. I’ve spoken with the guys at ppg and decided on a 1st to 4th gears, billet main shaft & billet selector forks helical cut dog engagement   Works out cheaper than syncro. 

  • 1 month later...

OK the gearbox is at PPG in SA & I'm about to send the clutch centres to HiOctane Racing in Sydney to get the clutch plate centres replaced with larger 26 spline ones so they fit the new billet main shaft in the gearbox.

PPG RB GTR/GTS-T Helical Cut Dog Gearset

PPG’s billet selector forks

PPG Billet RB Sandwhich Plate

PPG Billet RB Mainshaft

Transfer Case Upgrade

Xtreme Clutch 26 spline centres

now what will break next?

IMG_4252.jpeg

IMG_4253.jpeg

IMG_4254.jpeg

  • 4 weeks later...
  • 2 months later...

Since I don't often tow with it any more, the towball and hitch is in the boot, and I got this custom cover from ebay for the receiver.

stagea-hitch-cover2.jpg

stagea-hitch-cover1.jpg

(poor girl is looking dirty these days....we are a long way to the closest tar....)

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dragging some reo behind a ute or trailer will smooth out a dirt road, I've used reo a few times to do unsealed road maintenance when we didn't have any plant available  It's best done when the dirt is wet though, and then you just let it dry out for a day to harden up For wetting the dirt I've used some 44 gal drums in a ute or trailer, and a water pump connected to a hose with a old sprinkler tied to the reo to wet the material down whilst spreading Basically just drive slowly up and down the road a few times dragging a few sheets of reo wired together with the sprinkler wetting it all down as you go
    • I did a motokhana years ago with ??Sydney Sporting Car Club???, it was on a grassy paddock and was heaps of fun, I think it was north west Sydney IIRC The old R33 boat was covered in grass and dirt, but nothing that a good wash and detail didn't fix And thinking back, when SAU did the airstrip run in Goulburn years ago, where the old 33 won highest RWD MPH, the quickest RWD ET on the airstrip, and best paint IIRC (before the runs down the airstrip) the damage to the rear quarters from stones flicking up required them the get a respray  I would definitely do a grass motokhana again in the MX5 Who knows someone that owns a farm with a big empty paddock  Liability these days is a big issue though
    • No intention of driving the car the way it's set up now, just wanting to make sure I haven't made any mistakes along the way so that the tune can go smoothly, I don't want to waste anyone's time with stupid issues. And of course I intend to get it towed to the dyno in a completed state 😅 I have the base fuel pressure with the vacuum disconnected set at about 40psi, which I believe is at least relatively close to stock fuel pressure, maybe I'll have a fiddle with the reg and see what happens. For all I know I could be wasting my time with this and I should just plumb it in and see what the tuner reckons. I just find it a bit strange that it seems to be under so much load just free revving, but maybe that's just a result of the turbo slowing down the exhaust gasses and making a restriction in the flow, with no boost to compensate.
    • The boy just hit up google translate and it worked a treat, he said step one was "please urinate with precision and elegance", he then sent me the correct translation  I get some new loctite for the small fixtures tomorrow and get some "dort" going after that 🤣
    • Right, so is the fuel pressure the same as it was previously? If not, well, it's not going to work well. I can understand the theory I assume you are going for, which is: "Run it N/A, and if I have the original AFM, and same amount of fuel and intake air as previously, the fact there's a turbo in my exhaust should still make it run" Which it... might? Provided you don't actually change how much air or fuel is going into the car.. or getting out. But if you have changed that, all bets are off. What is the purpose to even have the car run this way? To get it to a tuner? And if the goal is to limp it to a tuner, you're still going to what - plumb up a whole intercooler system and new intake in the parking lot out front before your tune......?
×
×
  • Create New...