Rb26 Cam Covers On Rb25

[drpheel]

Long story short I got a blown rb26 collecting dust in the garage and a rebuild 25 at the machine shop atm, I'm looking to put the 26's cam cover on the 25 but I noticed that on the Rb25 Head the oil baffles over the cams are on the 2 last lobes in the back of the head rather then the 2 front on the RB26. This makes sense because the rb25 stock covers pick up the air in the back of the cover and the 26's picks up in the front. Now my question is, should I relocate those oil baffles to prevent oil from going back in the catch can !?

Would make sense to do so but just want to check if some one has gone down that road and can give me some advice

[webber]

In my experiences i have never had a problem running them as they are.

Cheers

[PM-R33]

Yeah I haven't had any dramas with them as they are.

[W0rp3D]

From my research you just use the hose's as they are on either set of covers, two problems you will have, if you use the standard cross over rb25 manifold the drivers side cover will hit the throttle body and the front cover (which is essential to get the smooth look of the 26 covers) will not fit over the cas, you will either have to enlarge the hump in some way or cut a hole for the cas to come through.

[drpheel]

Thanks for the info guys !!

Any one else running this setup !?