Jump to content
SAU Community

17" Enkie Rc T3 With Re55S

spec r
 Share

Recommended Posts

spec r Proficient

spec r

Posted
Posted (edited)

hi to all

as topic, got a set of ENKIE rims RCT3 wrapped with 255/40/17 Re55s

it is actually planned to be my track rims, but unluckily it is not going to fit on my STI, therefore my lost is your gain, and i will have to sell this set of rims to get something else for my STI.

here is the spec ,

WHITE RCT3

17 x 9.5 +35 (all 4 wheels)

stud 5 x 114.3

Re55s ( 255/40/17) it just sitting on the indictator so it is still good for 2 to 3 track days.

will fit GTR's / skyline / evo / all nissan's lastest model 05 + onwards STI's (mine is o3..thats y not fit)

rims condition is good, not gutter or crack damage. (need a good wash lol)

if any interest please call 0438222228 allen

rims located in Melbourne but happy to ship @ buyer cost, roughly $150 for a set to interstate by express courier.

I am chasing $1600 for the rims alone and $550 for the semi's but i am very keen to sell them all in once at a price $1900 , feel free to make me offer and i need a set of rims very urgently for coming track day as this set will not clear my fender :(

thank you.

Edited by spec r
Link to comment
https://www.sau.com.au/forums/topic/348719-17-enkie-rc-t3-with-re55s/
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...