Jump to content
SAU Community

Recommended Posts

Hi, Got a 2002 V spec II NUR in Mellinium Jade, 39xxxkm with LMGT 4 18x9.5+12 power FC with controller,sliding cam gears,N1 turbos,s/s front pipe, Ganador titenium exhaust,exerdy cusion button clutch ( to handle 306kwaw power) Nismo suspensions with oil reservior ,HKS EVC6 controler,720cc injectors etc.etc at $89800 ono.

Alex 0433878905

Campbellfield Melbourne

  • 2 weeks later...

hard to find a V-spec 2 for 55K~~

You can get a V-Spec 2 for 55K if you import and have the patience

Not sure about BB color V-Sepc 2

Got a Black V-Spec 2000 model with Nice mods for around 45K landed only last month,but you need to be pretty patient

Might be worth keeping an eye on the import shops as they usually list the cars that they have currently in transit. If one looks ok they will let you put a fully refundable holding deposit on it pending an inspection by yourself and a mechanic. Best part is if you like it then its yours but if you don't then just say its not good enough and you get your deposit back. Just make sure you get it worded that way when you put the deposit down.

Good luck with your search and like they said above just be patient.

I'm in Melbourne and considering selling my R34 Vspec, as I can' t use it as much as I want to, I ride my motorbike to the city every day and hardly use it on weekends. 60k is what would make me sell immediately.some quick info, to give you an idea.- yr 1999- Odo under 100k, timing belt is aftermarket upgraded anyways- bayside blue , full factory body kit- mildly tuned to 281kw @ all wheels, has heaps more potential- Brand new tyres and alignment just done- Like new inside out, you will hardly find a scratch- all seats retrimmed with new non slip leather- serviced every 5k- power fc, boost controller, intercooler, exhaust plus heaps more, looks immaculate top to bottom- too much to list, if you're interested , just pm me and you can have a look at the car in person.forgot to say something about the audio system, not a bad setup with amp+woofer & AVIC phone/nav/rev cam etc

post-52276-0-49239500-1296451453_thumb.jpg

post-52276-0-31797400-1296451578_thumb.jpg

post-52276-0-01413000-1296451549_thumb.jpg

post-52276-0-29373000-1296451831_thumb.jpg

Edited by M'ck'y

Thank you guys for the reply.

M'cky : nice looking car you have there!but im looking for v-spec 2 as the year is around 2001- 2001 =(

farch : good idea,but v-spec2 comes with different spec =(

thatlbeme : any recommendation on which import shop should i look at?p.s : i am located in adelaide,would be great if they have any..any suggestion?maybe outside adelaide perhaps? =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ...just a note of warning, you shouldn't drive it about with the TCU in limp mode with only 3rd gear available ~ apart from the fact you end up sheering the ATF at the torque converter interface, the high clutch in these isn't especially the strongest, particularly bolted to the RB25DE mill...which is likely a 4AX01 box with lighter duty high clutch (the RB25DET got the bigger high clutch)...be careful out there...
    • Hoping to do similar mods to my RB20 once I get it running and reliable again
    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
×
×
  • Create New...