Jump to content
SAU Community

Recommended Posts

Hi, Got a 2002 V spec II NUR in Mellinium Jade, 39xxxkm with LMGT 4 18x9.5+12 power FC with controller,sliding cam gears,N1 turbos,s/s front pipe, Ganador titenium exhaust,exerdy cusion button clutch ( to handle 306kwaw power) Nismo suspensions with oil reservior ,HKS EVC6 controler,720cc injectors etc.etc at $89800 ono.

Alex 0433878905

Campbellfield Melbourne

  • 2 weeks later...
  On 06/01/2011 at 7:19 AM, kevinisagoodboy said:

hard to find a V-spec 2 for 55K~~

You can get a V-Spec 2 for 55K if you import and have the patience

Not sure about BB color V-Sepc 2

Got a Black V-Spec 2000 model with Nice mods for around 45K landed only last month,but you need to be pretty patient

Might be worth keeping an eye on the import shops as they usually list the cars that they have currently in transit. If one looks ok they will let you put a fully refundable holding deposit on it pending an inspection by yourself and a mechanic. Best part is if you like it then its yours but if you don't then just say its not good enough and you get your deposit back. Just make sure you get it worded that way when you put the deposit down.

Good luck with your search and like they said above just be patient.

I'm in Melbourne and considering selling my R34 Vspec, as I can' t use it as much as I want to, I ride my motorbike to the city every day and hardly use it on weekends. 60k is what would make me sell immediately.some quick info, to give you an idea.- yr 1999- Odo under 100k, timing belt is aftermarket upgraded anyways- bayside blue , full factory body kit- mildly tuned to 281kw @ all wheels, has heaps more potential- Brand new tyres and alignment just done- Like new inside out, you will hardly find a scratch- all seats retrimmed with new non slip leather- serviced every 5k- power fc, boost controller, intercooler, exhaust plus heaps more, looks immaculate top to bottom- too much to list, if you're interested , just pm me and you can have a look at the car in person.forgot to say something about the audio system, not a bad setup with amp+woofer & AVIC phone/nav/rev cam etc

post-52276-0-49239500-1296451453_thumb.jpg

post-52276-0-31797400-1296451578_thumb.jpg

post-52276-0-01413000-1296451549_thumb.jpg

post-52276-0-29373000-1296451831_thumb.jpg

Edited by M'ck'y

Thank you guys for the reply.

M'cky : nice looking car you have there!but im looking for v-spec 2 as the year is around 2001- 2001 =(

farch : good idea,but v-spec2 comes with different spec =(

thatlbeme : any recommendation on which import shop should i look at?p.s : i am located in adelaide,would be great if they have any..any suggestion?maybe outside adelaide perhaps? =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...