Jump to content
SAU Community

Recommended Posts

I have bronze te37's 18*9 off set 10 with toyo 18*275*35 on my r34 gtr 2001 non vspec....close to new with no marks and they dont scrub

I want to change them for gold gt-c ( always been my favourite)19*9.5 but I dont know what off set I need and tire size.

Would these rims fit like the seller says and r these tyres any good to me. Thanks for any help

http://www.skylinesaustralia.com/forums/topic/348547-fs-19-volk-gtc/page__p__5604692__hl__volk__fromsearch__1#entry5604692

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/
Share on other sites

Just make sure that once you've decided on offset, such as +12 for your GT-R, that the GT-C rims cover your calipers.

GT-C rims come with a "Face 1" where the spokes are flatter > they won't quite clear your calipers with a +12 offset (unless you use spacers).

GT-C rims come with a "Face 2" where the spokes are a bit more concave > they clear larger Brembos, APs etc with a +12 offset.

Read > http://www.newerapar...0&ProductID=297

*Edit:- I've just noticed that the advertisement is offering a staggered set with offsets vastly different to what I'd put onto a R34 GT-R.

If you still want those with that offset at the front, they will probably clear your Brembos.

*Edit:- I run +12 Offset on my ADVAN RG rims

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5608768
Share on other sites

I have bronze te37's 18*9 off set 10 with toyo 18*275*35 on my r34 gtr 2001 non vspec....close to new with no marks and they dont scrub

I want to change them for gold gt-c ( always been my favourite)19*9.5 but I dont know what off set I need and tire size.

Would these rims fit like the seller says and r these tyres any good to me.

edit

:FRONT

19 X 9.5 +37 (will clear big brakes, have tested) - Face 1 with no tyre.

REAR

19 X 9.5 +46 - Face 2

Brand new Nitto tyres - 225/35/19 (should re-fit these to the front and get bigger once to the rear) would these tyres be any good to me on the front ???

Thanks for any help

here is the link to the rims

http://www.skylinesa..._1#entry5604692

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5609119
Share on other sites

i dont know much about offset and stuff but they would look super gay on a gtr, i got 17x9.5 37 on the back my gtt and they sit in like 1.5-2cms in the guard

yes i agree that would look gay times 10

Just make sure that once you've decided on offset, such as +12 for your GT-R, that the GT-C rims cover your calipers.

GT-C rims come with a "Face 1" where the spokes are flatter > they won't quite clear your calipers with a +12 offset (unless you use spacers).

GT-C rims come with a "Face 2" where the spokes are a bit more concave > they clear larger Brembos, APs etc with a +12 offset.

Read > http://www.newerapar...0&ProductID=297

*Edit:- I've just noticed that the advertisement is offering a staggered set with offsets vastly different to what I'd put onto a R34 GT-R.

If you still want those with that offset at the front, they will probably clear your Brembos.

*Edit:- I run +12 Offset on my ADVAN RG rims

yes i dont want to use spacers... so off set +37 face 1 for the front any good .....off set +46 face 2 for the back any good... if not what would be the correct off set to buy if i had to buy new..

post-76514-0-94192100-1294027517_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5609150
Share on other sites

  • 2 months later...
  • 1 month later...

Hey guys/ girls

I have a R34 GTR and i'm very interested in getting GT-C 20 x 10.5 +12 Face 2

Would that muck around with my 4wd system ? Coz I dont wanna settle with 19in

And would i have to do any modifications to make them fit ?

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5803044
Share on other sites

I have Volk GT-C face 2 19x9.5 on my 34 GTR the offset is +11 the tyres are 275/30 this is what rays engineering recommanded to use on a 33/34 GTR with 19x9.5, not sure how much difference +12 would make as terry has recommanded

For future reference

Some of the info in this thread is not correct (points finger at Terry, nicely)

I run 19x9.5 +12 GTC's Face 2 (BAKES old R34 GTR wheels)

He use to run a 3-5mm spacer to clear the Brembo's

+12 Face 2 are "B" disk. They miss my R34 GTT calipers by 1mm

+11 Face 2 are "A" disk which are for brembo's. Only 1mm different in offset but 5-6mm difference in caliper clearance

You can confirm this reading the Rays wheel charts

The difference in extra calpier clearance on the A disk +11 is done by running a smaller outer rim width (less dish) than the B disk +12.

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5816167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...