Jump to content
SAU Community

Recommended Posts

hey guys selling my white face gtr cluster goes to 320kph and 11000rpm white face with carbon surround not needed selling my r33 works in gtst manuals as well and autos if u change the sensor on the box... $ retail is 2350 from nissan selling $850 contact james 0466 407 464

pic is sample pnly mine has less kms still have genuine box from nismo

post-79386-0-46667900-1294041984_thumb.jpg

dont you think your asking a bit much?

i know i can buy a brand new one with 0km's on the dash cheaper then that. Try nengun performance or rhd japan

cheers chris

its got 79 kms on it less than 100 dnt think 79 gona matter its open to offers theyre hard to find i paid 900 brand new for it .im open to offers but yeah not dropping much look on nismo website at price i know u can get them cheaper but there fakes my genuine

ok sweet sorry i didnt know like its says open to offers wnt go less than 600 though

Don't be Fooled by people posting in URL here

by the time you pay for postage which is around $80+ for those websites

it will come close to $800 easy

thanks dude yeah plus some are fakes too and to people say oh but i can get one with no kms im sure 79kms wnt matter only got used from brisbane to goldcoast 79kms that all still have box $600 is lowest ill go dnt waste ya time going lower illl just keep it otherwise



  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...