Jump to content
SAU Community

Recommended Posts

Not really wanting to spend much

But after the GTR 33 front bar vents. below a pic incase they are called something else.

n64.jpg

Im hoping for black or carbon. but if difficult it wouldnt matter.

FYI I am in Vic if needs to be picked up.

Please PM me if you have available options.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/349245-wtb-gtr33-front-bar-vents/
Share on other sites

awsome, looked but couldnt find it, thanks for the link. .

if no ones got em ill buy from there.

Edited by AaronNM35

sorry mate,

here you go, the pic that you posted at the start is from these guys........ lol

http://www.musecret.com.au/prod1773.htm

Cheers

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
    • Well, you wouldn't use 2nd hand bearings out of another engine anyway....so just buying the proper bearings is obviously what you're going to do. The crankshaft would be common. The conrods might be common. There is essentially nothing else you would be able to use.
×
×
  • Create New...