Jump to content
SAU Community

Garret Apexi Vipec Nismo 6Boost Tial Os Giken Rb

Proximity Motorsport
 Share

Recommended Posts

Proximity Motorsport Experienced

Proximity Motorsport

Posted
Posted

Hey guys,

I am sadly, selling everything I have to do with an RB. There is a genuine reason for sale, as my priorites have changed in a different direction

RB25DET MOTOR - greddy style plenum, dressed with P/S pump, Alternator, Coils, complete loom, ECU, Injectors, everything - $1600

RB25 6 Boost high mount steampipe manifold, Garret GT3076 Turbo, 0.86 rear vband housing, Tial 44mm wastegate, and a custom front and dump pipe, 3" stainless off turbo and 2" stainless with a flex joint off the gate, plumbed back into the exhaust. Whole setup has only 10,000km on it, more than half of that is highway kays - $3500

Apexi SAF-C $250

Apexi AVC-R $500

Vipec V44 ECU with expansion harness and 7bar map sensor - direct plug in for RB25 - $1800

Nismo 740cc Injectors $800

OS Giken triple plate clutch and light flywheel $1800

Super Spark Coils for series 1 $300

Morristech high output coil igniter (series1) $200

RB25 Series 1 Loom to suit R32 - $300

RB25 Series 2 Loom, missing plugs that goto gearbox and cas - $150

Greddy style chrome inlet manifold $250

R33 GTS-T Rear cradle, complete, front brakes and hubs and lower control arms, knuckles - $1200

RB20 Gearbox with noisy bearing, but never failed $200

RB20/25/26 short shifter with replacement cover that bolts to gearbox, all billet $100

RB25 VCT Head minus cams, dissassembled, honestly have check exactly whats there, some parts may be missing. Includes rocker covers $350

RB30 Block, crank girdle, dip stick, crank, acid cleaned, honed $100

RB25 A/c Compressor - working $100

RB25 Power steering pump - working $120

adjustable cam gears - no brand (red + bronze) $150

Trust catback exhaust, 3.5" to a small trust box muffler, to twin 2.5" to twin 4" pipes $600

HKS Triple plate clutch to suit Hollinger box $1000

Ok, so I think thats all I have, ill post more later. If you want pictures hit me up, ill try get some up in the next few days though. Please call me on 0448 233 105 if your interested

Thanks, Leon

Cheers

Proximity Motorsport Experienced

Proximity Motorsport

Posted
  • Author
Posted

no its not the one out of my r33 that is still going to be a daily. This is out of a R33 with 87,000km on it, maroon. Some guy did his rear quater and I got it for the r32 but its not happening any more. Im getting some crazy ideas Cal haha. Message me if you want to know specifics.

Proximity Motorsport Experienced

Proximity Motorsport

Posted
  • Author
Posted

How much would it cost to ship the RB25 A/C compressor to WA 6060?

Cheers.

$125 Delivered through aus post with tracking number

Proximity Motorsport Experienced

Proximity Motorsport

Posted
  • Author
Posted

Will you sell the 6boost seperately? How much?

Sorry, but I will not separate turbo kit. They are all quality bits and the dump pipe is custom made to suit. Buy it all :P

Russman Grand Master

Russman

Posted
Posted

Sorry, but I will not separate turbo kit. They are all quality bits and the dump pipe is custom made to suit. Buy it all :P

Yeah thought about that but I already have a basically brand new 3076 for external gate. Will you sell it all minus turbo?

Proximity Motorsport Experienced

Proximity Motorsport

Posted
  • Author
Posted

Yeah thought about that but I already have a basically brand new 3076 for external gate. Will you sell it all minus turbo?

Want to give me a call on 0448 233 105 and we can talk. Leon

Russman Grand Master

Russman

Posted
Posted

Want to give me a call on 0448 233 105 and we can talk. Leon

Looking at a twing scroll 6boost and new rear housing atm so I'll get back to you if I need it.

thanks.

89CAL Grand Master

89CAL

Posted
Posted

Ah ok, sounded like you were selling the engine that used to be in the 32.... which is now in the 33 haha so I was confused. You working this week? Might swing by if your free a bit later today. See if theres anything I need

Proximity Motorsport Experienced

Proximity Motorsport

Posted
  • Author
Posted

Also have custom made stainless Intercooler pipes, 4" intake and greddy types rs blow off valve that has a stainless hardline return to intake, all custom polished stainless, $800

  • 2 weeks later...
islade Rising Star

islade

Posted
Posted

Hi, interested in the greddy style plenum.

How much would it cost with postage to Pacific Pines, QLD 4211.. does it come with all the hoses and bits and pieces? (EG: like what is included in the vulture motorsports kit for sale in the trader section) or is just the bare manifold?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...