mym35 Posted January 10, 2011 Share Posted January 10, 2011 got in m35 tonight to drive it.Turned on ignition. A W D LAMP COMES ON (STAYS ON) A T LAMP LIGHTS UP " A B S LAMP ALSO COMES ON WITH A SLIGHT HUM HEARD WITH IT. GEAR DISPLAY SHOWS WHEN TURNING ON BUT GOES OUT WHEN PUTS CAR INTO GEAR. LOW BEAM LIGHTS COME ON WITHOUT TOUCHING CONTROL.(WONT CHANGE TO HIGH BEAM, BUT TURNS OFF WITH IGNITION) This is beyond my tired old brain.Any suggestions would be appreciated. Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/ Share on other sites More sharing options...
Chris Rogers Posted January 10, 2011 Share Posted January 10, 2011 car starts/ runs? Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618720 Share on other sites More sharing options...
Tangles Posted January 10, 2011 Share Posted January 10, 2011 best to ask someone near you to plug in a consult cable with laptop to find out what the errors are. or disconnect battery for 24hrs, retry. hope its just a minor glitch. Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618791 Share on other sites More sharing options...
mym35 Posted January 10, 2011 Author Share Posted January 10, 2011 car starts/ runs? hi Chris,yes/yes ran it around block slowly, seems sort of ok.hard to tell. It changed gear a couple of times,once a bit rough.brakes also seem just a bit rough.hard to explain. Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618848 Share on other sites More sharing options...
Jetwreck Posted January 10, 2011 Share Posted January 10, 2011 as Chris said battery may be flat!....also check battery connections. If not sort of what Tangles said....get it too someone with a consult II or III. i.e. A Nissan Dealership! Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618861 Share on other sites More sharing options...
scotty nm35 Posted January 10, 2011 Share Posted January 10, 2011 best to ask someone near you to plug in a consult cable with laptop to find out what the errors are. or disconnect battery for 24hrs, retry. hope its just a minor glitch. Probably not best, I dont think that plug fits into the obd2 port. Check all the fuse boxes, all 3, and like Tangles said, disconnect the battery, clean the terminals, and reconnect after a few hours. If you have no joy, Im guessing there is a fault with the BCM? Perhaps try reconnecting all the plugs on it, its under the fuse box in the kick panel. Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618873 Share on other sites More sharing options...
mym35 Posted January 10, 2011 Author Share Posted January 10, 2011 Probably not best, I dont think that plug fits into the obd2 port. Check all the fuse boxes, all 3, and like Tangles said, disconnect the battery, clean the terminals, and reconnect after a few hours. If you have no joy, Im guessing there is a fault with the BCM? Perhaps try reconnecting all the plugs on it, its under the fuse box in the kick panel. Hey Scotty,remember its me you'r talking to whats the BCM? Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618925 Share on other sites More sharing options...
zei20l Posted January 10, 2011 Share Posted January 10, 2011 the BCM is the Body Control Module. its located in the driver's kick panel Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5618944 Share on other sites More sharing options...
iamhe77 Posted January 11, 2011 Share Posted January 11, 2011 best to ask someone near you to plug in a consult cable with laptop to find out what the errors are. or disconnect battery for 24hrs, retry. hope its just a minor glitch. Agree. Take it to a Nissan Dealership and get them to put it on their Consult 3 (it will tell them in plain English where the issue is) Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5619363 Share on other sites More sharing options...
mym35 Posted January 13, 2011 Author Share Posted January 13, 2011 Agree. Take it to a Nissan Dealership and get them to put it on their Consult 3 (it will tell them in plain English where the issue is) Just a quick thank you to those who gave me advice. Because of no garage to work in for the last 3-4 days while we had this horrendous wet spell,i was unable to look at the car until Yesterday.In fact i went out to the car turned on the ignition and lo and behold it had cleared itself.I took the car to my mate at Lees mobile mechanical in Caloundra. I didn't know it, but he has Snap On diagnostic set up and what do you know it had m35 Stagea and most imports on it. After checking all fuses, connections etc etc, he found no fault codes on the car through his diagnostic scan tool. He thinks that there was some moisture in the electrics which have had time to dry out. So good news on 2 counts. ! the car is ok and 2. I have a connection for any one who needs to check out their cars diagnostics without having to pay through the nose at Mr Nissan. Once again cheers. Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5623557 Share on other sites More sharing options...
zei20l Posted January 13, 2011 Share Posted January 13, 2011 good info graham, and glad the car is running fine for you again Link to comment https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/#findComment-5623782 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now