Jump to content
SAU Community

R33 Gtr

BIG MACCA

By BIG MACCA,
in Tasmania

 Share

Recommended Posts

BIG MACCA Contributor

BIG MACCA

Posted
Posted

Hey there peoples,

I am after some advice/opinions on a problem I am having with my GTR. The other day my car got hot and my radiator hose basically blew up and a lot of coolant,water and oil went everywhere and I had to get the car towed. I have since taken it to a mechanic and the hose has been replaced and been pressure tested is seems the oil pressure is more than the coolant/water. The oil is getting into the water. It has only been filled back up with water . I cannot drive the car as it is only going to get hot again. By the time I took it home around the corner it was already hot. The mechanic said it could be any of the following issues: The head gasket, a cracked head or oil catcher (I think). For them to confirm what the issue is they need to pull the engine apart or at least the front of it which could cost anywhere from 2k to 5k. At the moment I don’t have that sort of cash so it basically going to sit in garage for a while. Im temepted to try an sell it with this problem but not sure how it would go. Any ideas or suggestions. Not sure if i have posted this in right area

Cheers

Wade

Link to comment
https://www.sau.com.au/forums/topic/349898-r33-gtr/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By soviet_merlin · Posted

      Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Realized I haven't been back here in a while. Still here, still alive, still waiting for the car.  I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way. I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these. Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see: I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be: 1) Ohlins Road & Tracks 2) ATS Twin Carbon clutch 3) Endless BBK with some custom options and 4) Kansai Service carbon driveshaft I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more.  'til later.
    • Shoota_77
      R32 GTS-t RB30 sedan

      By Shoota_77 · Posted

      It's a stunning location!  I've been to NZ twice but haven't made it to the North Island yet.  Definitely on the cards but the South Island is hard to tear yourself away from too... Looking forward to see what you can wring out of it once you can get it to hold together!  Be awesome to get a low 11 or even sneaking into the high 10's pass out of it.  That's a bloody quick car that most people will never experience in their life.  Enjoy!
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Nominally yes but I’m not really at that stage yet. Outsourcing to Japan is also a relatively good deal at the moment because their currency has devalued much more against the USD.  You would assume this but a lot has changed from the pandemic. Mechanics are in short supply and demand for fixing old cars has gone up from the cost of new cars. 250-300 USD/hr is not an unusual shop labor rate in California and you’re paying that regardless of whether the guy is competent or not. Coworkers have been quoted 3000 USD for a water pump and thermostat at a dealer on an N54. Oil changes went from ~75 USD to 150 on fairly normal cars like Civics. The cost of the oil and filter hasn’t even kept up with inflation.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      The downside to that is that the cost of everything, particularly labour, is significantly higher here than it is over there in the Disunited States of Slavery. You can hire 3 tradesmen over there for just the Ranger Raptor allowance of a single 3rd year apprentice over here.
×
×
  • Create New...