Jump to content
SAU Community

Recommended Posts

hey,

Im looking to replace my bumper, as it has some damage to the driver side on it and was thinking i might just sell the gtr pods on it and replace the whole thing, but the only problem is i am having problem find anything remontly nice :P

i would like something to match my car nismo front bar and 400r side does anyone have any idea of a good 1?

Ok now onto the crazy ideas :D

1. r34 headlights onto a r33 is it possable and wat are peoples comments of how they would think they would look (tring to do a photochop but dont have any pics of r34 headlights) the reason this has come around is i need 2 replace of my headlights (damage) so i was thinkng i might do something different

2. My dad had this crazy idea and i was wondering if it would work, he said i wonder if u can hook the aircon up so it blows into the turbo, so some how connect the aircon to the intake pipe (where air filter is or make 2 pipes so still have air filter) and when turning on the aircon have coldair pump into it.

This idea has 1 major problem i think is that when the aircon is on the car seems to run alittle less quick and maybe the gain will just be as if it was running withou the aircon

any input would be helpful of all subjects :)

thanks Mike :headspin:

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

thanks for the photo prae :)

hmmm looking at the photo i am still not sure if it will work so good or even look so good confused :P

dan, i have no idea how the aircon works but i wonder if u could make a little aircon unit that has its own power supply and doesnt run off the engine and use that, my dad knows about those things so i will get him onto it when he gets back from work 2day.

Crazy ideas look wat happens when i dont go 2 school ahahaha :D

i had an idea back in the day when i was still wanting a v8 (hehehe how things have change) and i was thinking if adding a some vucum onto the intake pipes so that air is suck in faster therefore more air,

dont know if that would work again just another crazy idea

yeah dan_the_man is right, your turbo sucks a lot of air through the airfilters, an air conditioning unit wont even have close to enoguh power to make a differnce, i had the same idea when i was supercharging my bmw, also im not sure about this but the air that is coming out of the A/C unit isnt oxygen enriched like air from the atmostphere, which means even though its cold your engine be able to burn it as good as normal air, correct me if im wront.

If you use R34 lights you'll probably need to use R34 bonnett to match them ....then you'll probably need front bar to suit R34. I've just gone that route putting R33series 2 lights on my series 1. Series 1 bonnet and front bar no longer lined up properly

ok r34 lights r the go ahead :(

but only problem is i need a kit maybe someone could help me out, maybe rezz can come in and help me out

just get a bodykit instead of the stock R34 one if its better (eg: do luck, nimso etc)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...