Jump to content
SAU Community

Recommended Posts

Hey all,

A new initiative from SAUNSW; $30 Texi (Skidpan) entries.

For those of you who dont know what Texi is, watch THIS VIDEO or read THIS THREAD

For those of you who understand what it is, here's the deal;

If you have never entered a Texi before, we are offering you an entry for $30!

Now, compared to other skidpan day entry prices, most are around $100-150 and ran at Eastern Creek (smaller skidpan that the one we use. Less spaces means less runs per entrant). So if you're looking for a value for money event where you can drive your car off the street, you found it.

This offer doesnt require you to be a club member, or even have a skyline. As long as you want to give it a go then youre welcome. Anyone who's been to one before will agree they're a fun day out with the car and its beginner friendly.

The next Texi is open now for entries, entry thread link is here;

http://www.skylinesaustralia.com/forums/topic/349579-texi-skids-on-sunday-13th-feb-2011/page__view__findpost__p__5615787

Feel free to ask any questions to myself or any of the Exec team, we're here to help!

See you at the skidpan :D

-Steve

SAUNSW President

Link to comment
https://www.sau.com.au/forums/topic/350134-30-texi-entries/
Share on other sites

Joe, on my fuel thirsty setup that I had, sitting on limiter all day in second gear, I burned 20Litres... And ask the people that were around... I was near on dropping raw fuel out the exhaust... Only reason it wasn't coming out raw was because it was igniting on the way out... ;)

Link to comment
https://www.sau.com.au/forums/topic/350134-30-texi-entries/#findComment-5626674
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...