Jump to content
SAU Community

Recommended Posts

I'm keen too, just want to no about the booster, and how much wider the calipers are than the sumi's, as I don't want to have wheel clearance issues.

If they fit Im in!

The booster doesn't get changed.

The master cylinder can be changed to get a better pedal feel but it's not required. Basically the amount of fluid displaced at the master cylinder is equal to the fluid displaced at the calipers, so by making the calipers fluid capacity larger (larger pistons etc) you will require more pedal travel to displace the pistons the same amount.

You don't have to go out and buy the BM57 master cylinder, you could also try re-boring your existing one. Try a brake mob like Slacks creek brake and clutch if you are in Brisbane

The calipers appear to be 151.2mm wide. I just measured the stock calipers on my car and appears to be about the same.

Here's the measurements I used (the first picture):

http://www.wilwood.com/PDF/Flyers/fl74.pdf

BUY LIST

1. PMR33

2. DVS32R

3. .....

4. .....

5. .....

Hey Phil,

Again I see that you seem to be buying the same gear that I run on my car.

I've been running the Superlight 6 piston Wilwoods on the front of my car for over a year now, and yes they fit under my 17" rims. I purchased my kit through Arizona Z Car in the US, and I believe you'll get a better deal if you go through them. Contact Dave and see what price he can do for you without the brake lines, the link for his site is: http://www.arizonazcar.com/

I did upgrade my master cylinder to a 1" item from the R32 N1 GTR (non ABS) but as you've worked out, the upgrade isn't necessarily required.

Hope that helps, Ryno

You'll also see that Dave's kit runs even thicker rotors (at 35mm) and the alloy hats are a different design.

Awesome quality though, so I've been very happy with the purchase.

All up they came in at about the same weight as the stock R33 calipers and discs, which is a pretty impressive feat given the size increase.

Ahh nice :)

Yeah I looked into the Arizona Z kits; they use slightly different 6 piston calipers and as you have said their own rotors and hats. I might speak to them regarding the rear kit when time comes as they make their own single piston caliper kit for the hand brake setup.

You'll also see that Dave's kit runs even thicker rotors (at 35mm) and the alloy hats are a different design.

Awesome quality though, so I've been very happy with the purchase.

All up they came in at about the same weight as the stock R33 calipers and discs, which is a pretty impressive feat given the size increase.

do you use your car for track or just street driving?

Ahh nice :)

Yeah I looked into the Arizona Z kits; they use slightly different 6 piston calipers and as you have said their own rotors and hats. I might speak to them regarding the rear kit when time comes as they make their own single piston caliper kit for the hand brake setup.

This on phil?

http://arizonazcar.com/parkingcaliper.html

do you use your car for track or just street driving?

I use my car for street driving, but the Arizona Z Car package has been designed for the track, just have a read of some of the testimonials on the site.

When I bedded in the pads, after the 10th hard stop in a row from 110 kph, it was still wanting to lock the front tires, with no noticeable fade.

Yeah that's the one.

So in doing this phil does that mean we would be able to ditch our stock drum handbrake setup?

But also wilwood make 2 rear superlite caliper kits, 1 with an internal handbrake setup which would allow u's to do the same thing and delete the drum setup, or the other option which doesn't have a handbrake setup?? I thought it would just be easier to keep it as 1 system? Correct me if I'm wrong.

Edited by na beast

If we can get a 4 piston caliper for the rear with a built in hand brake into the caliper than that is definetely the way to go. Yes it will completely get rid of the internal brake shoes for the handbrake.

I came across this a while ago, however it mentions it is for light vehicles.

http://www.rallydesign.co.uk/product_info.php?products_id=11370&language=en

I will have to discuss it with the supplier and see if they make something that will suit our application.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...