Jump to content
SAU Community

Recommended Posts

Hey guys ive got a r33 series 2 wreck at the moment and also have alot of series 1 parts if needed. all parts must go selling cheap,

negoitabe on price.

Lorenz: 0422 868 703 , located in Melbourne, Eastern Suburbs can arrange postage though.

* front and rear rotors and hubs conversion $250

* rear rotors, calipers, pads and hubs conversion $300

* front calipers $200 rear calipers $150

* Drivers doro white in good condition $40.

* Complete s1 & s2 interior message what you need, various prices

* r33 stock springs and suspension front and rear $150

* r33 stock dump pipe $40

* 2 heater cores $50 each

* factory clutch $50

* rear bumper $50

* 2x r32 gts-t wheels $50

* electric window motors complete with regs (driver and passenger) $80 each

* 33 gtr steering wheel with * apexi pod filter $50 as new * hicas unit $50

air bag?? $100 post-76509-0-74529400-1294877601_thumb.jpg post-76509-0-61161700-1294877853_thumb.jpg

post-76509-0-40653600-1294877420_thumb.jpg

*Various boost guages, (boost, vac,fuel etc) $20 each * Manual turbo ecu s2 $120

post-76509-0-84882100-1294877631_thumb.jpg post-76509-0-04252500-1294877685_thumb.jpg post-76509-0-74153100-1294877924_thumb.jpg

*s1 driver indicators $40 pair, (2 sets) * door trims lh and rh sides $30 each

post-76509-0-94973300-1294877712_thumb.jpg post-76509-0-68027300-1294877732_thumb.jpg

* I have a few sets of

stock r33 wheels starting from $150-$300

post-76509-0-00421500-1294877787_thumb.jpg

*3.5" mild steel exhaust * series 1 front seat

$250, cat back passenger $30 * series 1 rear seat $30

post-76509-0-33593700-1294877968_thumb.jpg post-76509-0-76283800-1294878019_thumb.jpg post-76509-0-45734500-1294878081_thumb.jpg

* front and rear rotors,drive shafts * 2x dash crash pad in * aftermarket side skirts

and hubs conversion (no calipers) excellent condition, $150

complete set $500 $50 each post-76509-0-36772500-1294878244_thumb.jpg

post-76509-0-28727500-1294878144_thumb.jpg post-76509-0-18556500-1294878198_thumb.jpg

*electric mirrors lh and rh side (white) $40 pair *all this series 1 interior $50

post-76509-0-71353600-1294878353_thumb.jpg post-76509-0-62875100-1294878279_thumb.jpg

*tailights $50 has small crack, ones leaks water *auto turbo cluster $60, 117, k's *air box snorkel $20

post-76509-0-90909000-1294823424_thumb.jpgpost-76509-0-93719500-1294823475_thumb.jpgpost-76509-0-53619400-1294823560_thumb.jpgpost-76509-0-87149000-1294823611_thumb.jpgpost-76509-0-78547300-1294823704_thumb.jpg

*drivers side switch

with arm rest $100 *petrol flaps $10 each *abs unit with 3 lines $150 *pedals $40 factory intercooler $50 electric mirror $20

post-76509-0-28075900-1294823681_thumb.jpgpost-76509-0-33442100-1294823807_thumb.jpgpost-76509-0-14574100-1294823836_thumb.jpgpost-76509-0-48898500-1294823865_thumb.jpgpost-76509-0-27163500-1294824030_thumb.jpgpost-76509-0-01665300-1294824123_thumb.jpg

*Auto shifter $40 *Master Cyclinder $20 *lh and rh mirrors silver $40 pair

post-76509-0-25782400-1294876285_thumb.jpg post-76509-0-89025000-1294876358_thumb.jpg post-76509-0-31211900-1294876484_thumb.jpg

*Weathersheilds $20 (2 sets)

post-76509-0-31216900-1294876523_thumb.jpg

* Washer Bottles (3 sets) $20 each * Auto Turbo Ecu $80 *Glove Box $20 each

post-76509-0-53731800-1294876578_thumb.jpg post-76509-0-59344000-1294876612_thumb.jpg post-76509-0-44882300-1294876679_thumb.jpg

*Series 2 Front Bar $400 no fog lights.

post-76509-0-20132000-1294876718_thumb.jpg

*Ac Fan $40 *Turbo Pipes $20 *S2 boot with Spoiler $60 *

post-76509-0-69471200-1294876781_thumb.jpg post-76509-0-13586900-1294876809_thumb.jpg post-76509-0-54242900-1294876937_thumb.jpg

and much more including wiper motors, dash parts (clocks,antenna switch etc), every little part you may need.

just call or message me on 0422 868 703 even if the parts are listed here.

Edited by SIC JET
Link to comment
https://www.sau.com.au/forums/topic/350166-r33-wreck-cheap-parts-s1-s2/
Share on other sites

  • 2 weeks later...
  • 1 month later...

looking for the driverside power mirror switch with console if u still have it m located in melbourne

also will take auto shifter

Edited by skysilv
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...