Jump to content
SAU Community

Recommended Posts

Close to buying a 370gt. Deciding whether i should stick to the base 18" wheels or go the Type S 19", price difference being about $1500 overall for the car.

Just want to know how much firmer of a ride is the 19".

I have the 350GT and drove it with 18, 19, 20. I like the look of 20 the best but the feel of 19 the best. Go 19, doesn't affect firmness much at all and is so comfortable.

Link to comment
https://www.sau.com.au/forums/topic/350286-370gt-19-or-18/#findComment-5624286
Share on other sites

I have the 350GT and drove it with 18, 19, 20. I like the look of 20 the best but the feel of 19 the best. Go 19, doesn't affect firmness much at all and is so comfortable.

my 35 is on 20's with coilovers and its still a "comfortable" ride.

little bit firmer, but i wouldnt complain with what im running.

Link to comment
https://www.sau.com.au/forums/topic/350286-370gt-19-or-18/#findComment-5624305
Share on other sites

my 35 is on 20's with coilovers and its still a "comfortable" ride.

little bit firmer, but i wouldnt complain with what im running.

Would be interested in finding out how good the ride is with coilovers, i think the only way to go if your going over 19"s

Link to comment
https://www.sau.com.au/forums/topic/350286-370gt-19-or-18/#findComment-5624366
Share on other sites

i've just gone from 18 to 19 and all i can say is it's firmer but not harsh at all.i think the lower profile sidewall has less flex so cornering feels much better on 19

I agree with Roy.

1. With 18 inch, it's the closest to stock ride quality.

2. With 19 inch, it's firmer. You can still feel the abit harsher ride, but can still live with day-to-day driving.

3. With 20 inch, the car will need lowering to avoid a 4WD look, together with camber kits and spending more on tires.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/350286-370gt-19-or-18/#findComment-5624405
Share on other sites

19s all the way. The 19s on the 370GT look way better for starters. On my old V35 I had stock 18s on 45/18 rubber and I was initially suprised at how comfortable the ride was. My new V35 being a series 2 has the stock 19s on 40/19 rubber and to be honest I haven't felt all that much of a difference in ride comfort. The 19s look way better too IMO.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/350286-370gt-19-or-18/#findComment-5625831
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • 2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
×
×
  • Create New...