Jump to content
SAU Community

Recommended Posts

Hey guys i got a 1999 black s15 in very good condition im keen on swapping for a standard Rr32 or a R33 GTR preferbly white or black... im hoping to find a car that is equal value

the interior is in immaculate condition with no wear at all...Seats very good with no tears

whats most impressive is under the car...not one sign or rust...leaks or worn bushes in sight..it is very impressive underneath..front and rear axle assembly is

very good...will set up on jacks for you to inspect =D

The body is in close to immaculate condition due to a few light scratches on the drivers door and the front bar has stone chips on it..othwerwise it would of been immaculate

The car also has an ORC 409D Single Plate floating clutch that is noisy as hell...it sounds bad but its normal for this clutch..those who knows ORC single/ twin or any other multi plate performance clutches can be very noisy..

I would understand if the noise turns anyone off from swapping

Good:

-VCT ,timing chain + Tensioner replaced by previous owner

-81xxxkms

-1 year rego starting from Jan 26

-Koyo Radiator

-Front slotted rotors

-EBC green stuff pads

-Turbosmart Megasonic Dual port BOV

-Std t28 BB turbo

-60 psi turbosmart e-boost2 Set up to 11.6 PSI

-Cooling pro Front mount

-Tomei Dump pipe

-$1200 ORC single plate clutch

-High flow Cat converter

-custon 2 1/2 inch cat back exhaust

-Neomax Coilovers

-Nismo Front and rear strut Brace

-Alarm

-Tinted windows

-car will also come with a few standard parts i.e turbo back exhaust..boost gauge rotors Spec R side skirts, Nismo S-Tune suspension

Bad:

-Front bar has stone chips..nothing major

-NOTE: currently have standard cat back fitted and it is rattling like crazy...hitting on the bottom of car..

will have custom cat back fitted soon

-Some light scratches

-Headlights are bit faded

0406397152 my number

Located in sydney Pics will be up very soon

Thanks!

Edited by BuiSr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My take on gg2 48mm, 54mm, 58mm, and 62mm compressor map for same size compressor vs gg1 : All gg2 only outflow gg1 above 20 psi. As all g gen 2 surge line at lower left of comp map move to the right, all gg2 sacrifice spool vs same size gg1, surge line move to the right worst for 54mm gg2. So for same size compressor if you want best response, use gg1, if you want max hp at >20psi use gg2 but you will be laggier vs same size gg1. Max compressor efficiency drops to max 75% on all gg2 vs max 76%-80% of same size gg1. Iirc lower efficiency means hotter iat less dense air so lower hp at same operating point of comp map. Also curious why gg2 is mapped to lower max rpm vs same size gg1 (only 48mm size both gg1 gg2 mapped to same rpm) : 54mm gg1 165,000 rpm  vs  gg2 160,000 rpm. 58mm gg1 150,000 rpm vs gg2 140,000rpm. 62mm gg1 145,000 rpm vs gg2 140,000 rpm. If gg2 can safely spin to gg1 rpm then they can flow a bit more than as mapped. Good thing that all gg 2 interchange compressor and turbine housings with same size gg 1. So gg1 owners can buy gg2 chra only if planning to boost >20psi.
    • My stuff is all with Shannon's, granted, I don't really have imports I'm driving on the road, however, I've had multiple cars at the same time with them. Presently we have the Landcruiser on laid up cover, Sarah's Kluger on full cover, and the house insured. About 18 months ago Sarah wrote her Subaru Liberty GTB off, insured with Shannon's, and the payout, and buy back of the wreck was super quick. In 2020 we had the VF Commodore totalled in a major hailstorm. Storm was on the Saturday, I called on the Sunday and lodged it, vehicle was towed on Tuesday night, assessment team called on Wednesday to say it was a total loss and get payout details, money was in the bank on Thursday morning. Have had a few other claims both at fault, and not at fault, over the years, and never had an issue with them.   Funnily enough, they're also the cheapest insurer I find for things like Sarah's Kluger.   I will say I'm less impressed dealing with them lately around "the experience", as a lot of their staff that you deal with aren't car enthusiasts. Shannon's has a much more main stream feel ever since they decided to become "big corporate", laid a heap of staff off, and then hired a bunch of non enthusiasts. At the same time they've been making a push to be less "call us and we'll personally have someone who cares help" to "hey, this computer can do stuff for you" and are trying to get more square pegs to fit round holes. (That's just the vibe I get from them). Again, have had no issues with claims with them, but get a bit of a "less personal" feel from them.
    • A thing I wasn’t happy with with enthusiast was during the initial phone call they told me they’d insure it for 130k but needed photos.   I then sent them photos and they told me $80k as there were other cars either similar modifications available for around that price, I told them to send me the links to said cars so that I can buy them. i then sent the modification list with prices of the parts (no labor) and the price then came to 115k, which is still shy of the 130 that was agreed in the initial phone call 
    • Ask me a bit later this week before payday
    • I agree that delayed payment probably isn't the most suitable solution. It seems a solid complete transaction would be best. As I wouldn't be using this sale as a line of credit that would typically earn interest, we can probably arrange a much cleaner single transaction deal. I can do $92.52 today. Would you prefer EFT, or Cash on Pickup?  😛
×
×
  • Create New...