Jump to content
SAU Community

R34 On Board Computer

marCus92

By marCus92,
in Exterior & Interior Styling

 Share

Recommended Posts

Charles89 Grand Master

Charles89

Posted
Posted

Lol when you said on board computer, I thought you meant the ECU lol.

If you meant a MFD (multi functional display), like this one:

165546_10150166583989409_568889408_8257640_5458213_n.jpg

Then I bought mine for $800 2nd hand, they range from $700-1000. And it took me 8 hours to wire it up, considering that I have NO experience with electronics, never installed a headunit before lol.

I think if you were to get someone to do it, it would cost like $200-300.

marCus92 Apprentice

marCus92

Posted
  • Author
Posted

Lol when you said on board computer, I thought you meant the ECU lol.

If you meant a MFD (multi functional display), like this one:

165546_10150166583989409_568889408_8257640_5458213_n.jpg

Then I bought mine for $800 2nd hand, they range from $700-1000. And it took me 8 hours to wire it up, considering that I have NO experience with electronics, never installed a headunit before lol.

I think if you were to get someone to do it, it would cost like $200-300.

Yeah that. ive always loved the look of it and the fact it has everything. where about would i be looking to purchase something like that and how big a wiring job is it?

Charles89 Grand Master

Charles89

Posted
Posted

Yeah that. ive always loved the look of it and the fact it has everything. where about would i be looking to purchase something like that and how big a wiring job is it?

There's one on sale on SAU (for sale section) I believe. As for other places, maybe wreckers, private sales or from Japan.

As for "it has everything". To be honest with you, I think the MFD is overrate lol, if I have a choice now, I wouldn't have bought one, would rather spend that money elsewhere. But I guess the MFD would raise my resale price if I was to sell my car.

As for wiring. You will need to splice into your ECU harness, triple gauage harness, speedo cluster harness. There's probably about 10-12 wires you need to locate and splice into.

But I do see your project being a more difficult job. Because with stock GTT's, they come with the triple gauage cluster, which is hooked up to the boost, and oil temp. Which a NA GT wouldn't have (the triple gauage & harness). That would mean that you'd have to locate those things yourself and splice into it. Because if I remember right, the MFD splices into 3-4 wires in the triple gauage harness.

I honestly reckon you shouldn't do all that to a NA R34. If you are on your P's and restricted to a NA, then you should just keep the NA until you are off your P's, then sell it and buy a GTT. Because the price difference between the GT and GTT is barely anything. And that way, you wouldn't have to muck around with upgrading all the brakes and stuff. It will also be a cheaper way to go.

marCus92 Apprentice

marCus92

Posted
  • Author
Posted

There's one on sale on SAU (for sale section) I believe. As for other places, maybe wreckers, private sales or from Japan.

As for "it has everything". To be honest with you, I think the MFD is overrate lol, if I have a choice now, I wouldn't have bought one, would rather spend that money elsewhere. But I guess the MFD would raise my resale price if I was to sell my car.

As for wiring. You will need to splice into your ECU harness, triple gauage harness, speedo cluster harness. There's probably about 10-12 wires you need to locate and splice into.

But I do see your project being a more difficult job. Because with stock GTT's, they come with the triple gauage cluster, which is hooked up to the boost, and oil temp. Which a NA GT wouldn't have (the triple gauage & harness). That would mean that you'd have to locate those things yourself and splice into it. Because if I remember right, the MFD splices into 3-4 wires in the triple gauage harness.

I honestly reckon you shouldn't do all that to a NA R34. If you are on your P's and restricted to a NA, then you should just keep the NA until you are off your P's, then sell it and buy a GTT. Because the price difference between the GT and GTT is barely anything. And that way, you wouldn't have to muck around with upgrading all the brakes and stuff. It will also be a cheaper way to go.

Yeah your probs right be much easier to just wait till im off my p's. plus if i dont spend the money on the MFD it means i can put more towards sound and shit. thanks for the help mate.

n0rko Contributor

n0rko

Posted
Posted

Also it seems you think that you can just get an N/A car and put a turbo in. You cant just place a turbo on a non turbo engine in case you didn't know, you need to upgrade everything under the bonnet, it would probably cost more than a gtt itself.

marCus92 Apprentice

marCus92

Posted
  • Author
Posted

Also it seems you think that you can just get an N/A car and put a turbo in. You cant just place a turbo on a non turbo engine in case you didn't know, you need to upgrade everything under the bonnet, it would probably cost more than a gtt itself.

yeah i know but wasnt sure that a gtt was roughly same price until mentioned above, and figured i was doing it the cheaper way till i researched it

marCus92 Apprentice

marCus92

Posted
  • Author
Posted

Just make sure you do enough research before buying a skyline, since you don't know too much about it. Regarding insurance and what's legal and what's not etc etc :P

yeah im pretty much set with research i got two friends that are heavy skyline fans and both own r34's. im thinking cause i love the 4 doors il keep my first one stock and once off p's keep it and get a gtt. or can you buy gt-t skylines in 4 door?

marCus92 Apprentice

marCus92

Posted
  • Author
Posted

Yes... GTT does come in 4 door... Pretty commom too. But manual ones are harder to find.

really? like hard hard to find? also how much do you reckon i would i be looking at spending for a 2000 Gt-t 4 door in manual with low k's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • JC71
      gauge needle removal

      By JC71 · Posted

      okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...