Jump to content
SAU Community

Recommended Posts

Ten tips to a good day

1.)Oil level is at the Max mark on the dip-stick

2.) Coolant - ensure the overflow/reservoir is full

3.) Brake Fluid - ensure the fluid is at the Max marking in the reservoir

4.) Clutch Fluid - ensure the fluid is at the Max marking in the reservoir

5.) Check that all pipe-work is secure and no hoses are becoming loose

6.) Check that your battery is secure and does not move

7.) Make sure that all caps are on and secure

8.) Suitable material left on your brake pads

9.) Tyres are in good condition and wheel nuts tight

10) Nut behind steering wheel secure

9 out of 10 aint bad

See you all tomorrow guys and girls

1 1/2 ltrs of oils in the can 2 1/2 ltrs in-on-around-under the car with god knows how much I dropped on the track.

First lap was slow as they left the red light on most the way then when it was turned off I gassed it to the last turn braked then mashed it down the straight, slow into 1-exit 2 and headed up to 3 with the arse slipping around which I put down to cold tyres, went around again with the arse playing silly buggers then at the exit of 2 heading to 3 it tanked slapped me around a bit and I went off, I got back on allright but it done it again in the exact same spot AND I lost powersteering so I came into the pits to see WTF was up.

Popped bonnet and the cold side was covered with oil and both the powersteering and aircon belts were off, on further inspection the aircon belt was torn to peices and wrapped around the fan with little bits everywhere while the P/S one had its arse handed to it but not as bad(had alot of the cord ripped out).

Oil came from the catch can which is where I got the 1 1/2 ltrs (volume of the can) from.

Filled up the car with 4ltrs of oil (sump holds about 7), moved the bits of eaten belts and came home.

All in the first 3 laps.........................................................:rant:

Mark

The oil sprayed onto the belts causing them to slip off. Let us know what they do about ur engine.

Had a great day today. Few bingles at the end of the day unfortunately. No body hurt luckily.

Time for me to get some decent tyres on the front to get rid of the oversteer and hopefully my wilwood brakes turn up this week. My brakes were a big let down.

yeah thanks people it was ace, no injuries to my pride other than a flat spotted tyre and the odd backwards moment into the dirt.

i wish some other people (Eric) could say the same..poor bugger, keep us posted on devs and if you end up getting any kind of recompense from the offender.

managed a personal best of 1.15.8 so pretty chuffed with that though i know theres lots mores in it!

bring on the next track day ASAP!

pics etc up after i pass out..

Forgot to say I have some pics on my facebook, not sure if you can see this, if not feel free to add me! http://www.facebook.com/album.php?aid=272781&id=652446637&l=04a9065e42

And also MASSIVE thanks to Steveo for standing there all day on pit lane, and to AggroDave for sorting out all the entries and forms and shit. You guys rock for the time you put in!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...