Jump to content
SAU Community

Recommended Posts

Hi there guys and girls, i am currently parting out a Black 2 door R33 S2 Skyline. i have sold the engine, gear box, suspension, and brakes but most of the other gear i still have around the place. i also have parts from a S1 RB25DET which i was in the process of rebuilding, but moneys an issue, so parting it out

  • RB25DET Head (stock condition and in very good condition, comes with rocker covers and valves etc, no plenum or coil packs or exhaust manifold) $250
  • 2x RB25DET Lower portions of the intake plenum (part that bolts onto the head) $75 each
  • RB25DET alternator $60
  • RB25DET Power Steering pump with bracket $100
  • RB25DET Throttle body $50
  • Stock BOV $30
  • S1 RB25DET coil packs (working order) $100
  • 2x Apexi BOV $50 each
  • Manual Brake pedal $20
  • Manual Clutch pedal $20
  • Slave cylinder, lines and piston (that pushes on the fork) $30
  • R33 overflow bottle $20
  • Engine fuse box cover $10
  • Complete Front hubs with upper control arms $70 each (got both Rh and Lh)
  • Drivers side Rear tail light (white in colour) $60
  • Windscreen wiper motor $15
  • Passenger airbag (not deployed) with wiring $100
  • Air bag module $60
  • Stock R33 rear strut brace (silver with red SKYLINE writing) $100
  • 2x Rear Hicas units $30 each
  • RB25 engine cross member $100
  • S2 steering wheel with airbag (un deployed) gd condition $140
  • A pillar plastics (2 sets) no holes $20 each
  • HKS (J tank) inter cooler (smaller intercooler, bit of fin damage) $100 with piping
  • Apexi Radiator (with apexi radiator cap, slight fin damage) $200 ono
  • S2 glove box and surround $40
  • Rubber manual gearbox boot with steel ring $30
  • Stock front and rear sway bars $40 each
  • Passenger side mirror (white in colour) $40
  • S2 black front grill $80
  • Rear garnish - part between tail lights $50
  • RB25 12psi turbo actuator $50
  • Pod filter adapter (to put a large pod filter on) $30
  • Black drivers door handle $20
  • Space saver $50
  • Black boot lid with s2 wing $150
  • Stock R32 GTST springs (good to get off defect) $100 for all four
  • Earthing Kit (Hot Earth) $50
  • A/C Fan $100
  • S2 front guards (2x White and 1x Black) $100 each
  • S2 Front and Rear seats (perfect, apart from small hole in drivers side) $200 the lot
  • S2 Ash Tray $20
  • Drivers power window switch (no surround) $40
  • Passenger door window switch $40
  • Electric side window switch $30
  • Petrol flapper door (white) $10
  • Passenger door, with glass (black) $120
  • Rh adjustable Castor rod (unknown brand) $40
  • Rear Quarter Panels with side glass $400 a panel
  • Rear windscreen $75
  • Door seals (good condition) $20 each
  • Bonnet latch cable $20
  • Boot latch cable $20
  • Stock fuel pump $30
  • Steering column with barrel and key $75
  • Complete s2 floor carpet $50 (no holes)
  • s13 Silvia 4 stud rear hubs, rotors and brakes $100
  • All interior plastics as well

i have lots and lots of parts, so shoot me a pm and just ask or if you want pictures of anything again happy to get some for you. Happy to post at Buyers Expense Cheers Ty :thanks:

Edited by sus 32
Link to comment
https://www.sau.com.au/forums/topic/350873-r33-series-1-2-parts-to-clear/
Share on other sites

Mate,

Manual Brake pedal $20<LI>Manual Clutch pedal $20<LI>Slave cylinder, lines and piston (that pushes on the fork) $30

they mine. if you got them. belive they in good condition. how much postage 4 sydney 2113. please pm

HKS front mount - Sold

1X washer bottle - Sold (one to go)

S2 Ashtray - Sold

A/C Compressor - Sold

S2 power antenna - Sold

most other parts still up for grabs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Way more than 1cm. Appreciate the advice maybe I try changing the bushing first
    • IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
×
×
  • Create New...