Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

As said previously, if you sre going yo go this nuts, do a VH45 if you are that keen, alloy engine, so probabaly same weight or lighter for 1.9l more capacity, V8 sound, then strap 2 turbos to it.. If i was going to mess with a GTR, this would be what I would do, 1500+hp should not be *too* hard..

I like the v8 idea for insanity. I heard RIPS did a VH41dett in a GTR for someone in the UK, so its possible.

Or a Spool 3.4lt RB30.

Or a RIPS 3.3lt RB30.

Or a Nitto 3.2lt RB30.

Its possible to do a 3.2lt in an Rb26 block as well, the advantage being no fittment issues or adapter plates required. Nearly anything is possible if you have a fat enough budget.

The V8 idea sounds sick. Could you keep the AWD with the LS3 though. Yes alot of custom work but is it possible. If it's not then what's the point of having a rear-drive V8 Skyline, just go buy a Corvette or something. It would be a waste of a GTR if you don't keep the four-wheel-drive. You could do it with a non turbo R34 though. It would be a sick idea cos they're going really cheap now. Whole build including the car would be $30,000-40,000.

The tuner in the clip said that he's got more experience tuning 2JZ more than RB, so that's why

he swapped the engine.

Keep in mind that the labour cost in Thailand is not as expensive as in Australia, and 2JZ parts

are much easier to source in Thailand compare to RB.

But still I wouldn't do it to my car.....

Good son of rajab that thing is hideous, the R34 is boxy-ish and the supra is rounded. Together they look WRONG. The Supra looks like a shitbox next to the R34 (GT-R. It can look good but stock it's not even a competition.

Edited by sikmatesubwoofa

No that car is real, I kid you not. I'd heard of it doing the rounds over there.

To the OP, I get what you want to do - it's called "Spending heaps of money on your car to make it worth less". It's like wearing your boxers on the outside of your pants - different, but not necessarily better.

If you really want to be controversial, get a turbo Falcon motor and drop that in - then you'll have 4.0 litres to play with.

No that car is real, I kid you not. I'd heard of it doing the rounds over there.

To the OP, I get what you want to do - it's called "Spending heaps of money on your car to make it worth less". It's like wearing your boxers on the outside of your pants - different, but not necessarily better.

If you really want to be controversial, get a turbo Falcon motor and drop that in - then you'll have 4.0 litres to play with.

i'd had the thought of doing that one day, but i don't think the engine would fit in the engine bay that easily (mainly due to the height of it).

No that car is real, I kid you not. I'd heard of it doing the rounds over there.

To the OP, I get what you want to do - it's called "Spending heaps of money on your car to make it worth less". It's like wearing your boxers on the outside of your pants - different, but not necessarily better.

If you really want to be controversial, get a turbo Falcon motor and drop that in - then you'll have 4.0 litres to play with.

I can see the shitty blotches :laugh:

Or maybe it's just a shit photo...

No that car is real, I kid you not. I'd heard of it doing the rounds over there.

To the OP, I get what you want to do - it's called "Spending heaps of money on your car to make it worth less". It's like wearing your boxers on the outside of your pants - different, but not necessarily better.

If you really want to be controversial, get a turbo Falcon motor and drop that in - then you'll have 4.0 litres to play with.

Cheffy, you kid me?

43111584.jpg

Prove me wrong with pics of it doing the rounds :D

Oh and Supras don't look like shitboxes, Mr. rancer boi!

Edited by Ten Four

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes there is a front and back insertion point on each side, each point is tubed with supports into the car and tied to the cage/ floor mount point
    • Is the jack stand system tied into the cage somehow? Upgrades look goooood 😍
    • Big updates, tons of work and $$$ 
    • it takes so long to get things done but ... they are nearly there and we hitting the track soon again  So - at Perth Festival of Speed the car unfortunately had a decent off, wasnt me driving, wasnt the person drivings fault. Long story short car got sent very fast towards the wall without the control on throttle from the driver input and a disaster was averted but there was damage that needed to be fixed - carbon busted and alot of bent bits The splitter got munched and had to go back to get fixed - took a bit to get it there, fixed and back but got a surprise package when a new double element higher DF splitter came back - nice surprise !  and first person to have one     At a car show I took the car too some punks stole one of my carbon indicator blanks and stomped on the other so had to get a new set of headlight / indicator combo from tops stage so got front fender vents as well to put in the order     While all this was happening the new MCA golds turned up and did some fiddling around with those   Put in the flappy paddle system and clutch lockout wiring/ system   We have also put shorter gearing in top top it out at 300 kmph in 6th gear  where previously I held 5th to 282 at SMP and 277 in Perth   Looking for better control and faster acceleration     I wasnt intending on doing pedal box I was managing with the brake master replacement system I had going on and adjusted std pedals but on applying the clutch switch to the old system we found the *insert technical word here * bar that goes from the pedal to the master was bent about 40 deg and about to snap = lucky find otherwise be a bad bad time - discussion was had about getting a custom bar built to withstand the load but in reality it was time      making any suspension, wheel or anything adjustments to date has been a nightmare - aero off, adjust, check and repeat - time consuming and hard - short of going full airjack system we fashioned some external manual car lifts this will make life a million times easier     All the bent framing, some intercooler pipes and other has been fixed and replaced and after 6 months I finally have the car back at home in my control so its get to work on it, set ride heights, wheel align and will start track testing again soon   So ultimately other than a few flashy bits nothing actually looks likes its been done but in reality alot has. Typical   We'll see how all this goes        
×
×
  • Create New...