Having A Few Problems With Rb25 R32

[RaceDat]

Hey,

First Off I Would Like To Apologize If This Is The Wrong Section.

Anyhow I Am Having Some Issues With My Rb25 Conversion Into My R32. It Will Not Rev Over 2500rpm. (Read On Before You Flame Me)

I Completed A Diagnostic Test And My Results Were:

11 CAS (Fixed)

12 AMF (Fixed)

34 Knock Sensor (Thought It May Be The Old Fuel)

I Then Changed The AFM & CAS, Drained All The Fuel.

This Had No Effect Except I Has No CAS or AFM Error.

I Had The S**ts At This Stage So I Left It For The Night.

The Next Morning I Tried Again But It Cam Up With The MAF (I then tested both maf's and they both passed)

Dose Any1 Have A Idea What My Problem Could Be???

And Also Dose Any1 Have A Vacum Line Diagram Or A Picture Of One???

Thanking You In Advance..

Kieren

RaceDat MotorSport

P.s Before You Flame Me,Yes I Am Only 18 But I Love My Cars And I Am Australian Super-Sprint Junior champion so i Know My Basics About Cars & Really Am Trying My Best To Have This Car Ready On A Small Budget

[akaaa7]

if its not the maf coil packs r shorting out check for soot round where they sit, quick fix is insulate them with rtv sealent