Jump to content
SAU Community

Recommended Posts

i have searched but could not find what i was looking for

i currently got suspension that is way way too stiff for road use, so looking for lot more softer ones that are road oriented

what are my options

1. can i make the current ones softer by putting in different springs, if so who does this sort of work

2. Buy stock R34 GTR V-Spec suspension

what is cost for both option going to be

Also looking at the SAU, it seems lot of people recommend this spring rate

Spring Rates:

Front: 8kg | Rear: 6kg

See picture of Current Spring and Car Ride height "Height is set to the maximum height, which i am not too happy about as it still too low"

img4880s.jpg

img1576qn.jpg

Tein Superstreets should be the easiest solution and sell your existing if you can.

got a quote from these guys

http://www.fulcrumsuspensions.com.au/tein.html#superstreetkits

there are 2984 bucks fitted, that a bit more than i was expecting Damien

If it is a road car with the occasional spirited drive get a set of Bilsteins with 6/4 spring rates front and rear; may as well get a camber kit too to correct your camber if you want to lower the car slightly. Stay away from Jap brands.

If it is a road car with the occasional spirited drive get a set of Bilsteins with 6/4 spring rates front and rear; may as well get a camber kit too to correct your camber if you want to lower the car slightly. Stay away from Jap brands.

recommend any retailer / shop that do these

I recommend the Nismo S Tunes as they are very compliant on the road to soak up the bumps and firm enough to be sufficient for a spirited drive. Spring rates I thibnk are 8K F/R

I don't mean to blow my own trumpet, but I have a set in mint condition for sale for $1500. Checked and OK'd by Racepace.

Pm me if interested

Import them. I got my Super Street for 1.4k landed. I dont think the aus spec super street are worth the extra 1k. PM me if you want more details. As mentioned by Choyda, super street is the best for comfortable. handling and ride height (being fully adjustable). They will make the height illegal if you drop them to the lowest.

No argument with above posts.

An alternative I used with my previous R34 GT-R was to use standard shocks with "Tanabe Progressive Springs"

Obtained from Powerplay Imports. Costed me $300 incl. instal.

The car ended up 18mm below V-Spec height & front lip was 105mm above the ground. Camber was not altered much at all.

> Comfortable ride without sacrifice to cornering. The only downside is to be extra careful with speedhumps and certain driveways.

8/6 is still pretty stiff, and IMO too stiff for a street only car. I'm guessing you're more likely to like 6/4. It would well be worth getting a ride in cars with those rates as everyone has they own idea about what they call stiff and what they like.

If it were me i'd think about using different springs with the suspension you have, since it looks alright. Any identifying stickers?

will give Accurate suspension in Underwood a call

they seem to have good reputation on re-building my existing shocks

if that price is too much, might import them

ERD does suspension !!

say no more then,

i am going there next month hopefully, i got few thing for Dan to fix on the Car

will get him to have a look then

BC BR from Just Jap with 6/4 option springs (should be able to ask for whatever rate you like).

Local tire alignment place will put em in for no more than $400. Or you can put em, got a jack? Got a socket set? You can put em in.

www.justjap.com

Also your current set of shocks don't have a threaded body, most if not all of the newer units do. This allows you to raise / lower the car without changing

the spring loading.

  • 2 weeks later...

ERD does suspension !!

say no more then,

i am going there next month hopefully, i got few thing for Dan to fix on the Car

will get him to have a look then

If you're looking for shock/spring combo, look no further because Dan does!

I would advise strongly against the Tein Super streets. they are cheap twin tube shock and absolute entry level teins. not great really. the upper level tein stuff is great but their entry level stuff is not so great.

I'd also stay well away from the BCs and the other china brands.

You want comfort. My advice would be:

set of used V-spec shocks and springs. will be cheap. certainly less than $1000. Id say more like $500-$800 for a good set.

Set of nismo S-tunes with the springs (like what Matt is selling). they are a good shock and give great handling. they are a little firm but by no means uncomfortable.

or a set of bilsteins with some suitable springs (around 6kg front 4kg rear is plenty but seek some good advice on that) and valved to suit. Cost probably around $1500 for shocks and springs but are quite good.

if it were my car I'd probably go the S-tune option. Nismo parts like these are designed for road cars and have comfort and safety in mind when built. they are a good set-up for a road R34 GTR. I have had a set myself in my old silver R34 (now owned by GTRNUR on this forum).

yeah I still think something like matts S tunes or the ones on yahoo would be the go. they have remote canisers on the front, have suitable spring rates, they also lower the car about 30mm and are great quality. they are THE bargain suspension upgrade for R33/34 GTR. they are around $2500 new so are by no means a 'cheap' shock and are made in japan. They are also damper adjustable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...