Jump to content
SAU Community

Slide-Worthy Daily Driven 180Sx


Recommended Posts

Hi all I am selling my 1993 180sx; bit of a blurb: owned it for ~2 years, When i purchased this one, my goal was an immaculate streeter with low kms that i could build up to drive daily as required

as well as to and from the track. I literally looked at 15-20 before this one and bought it from a member on here who was up there with the most pedantic nissan owner on here. I myself have done changed oil and filter after every track day and there have been four or five in this car in total (2 or 3 peanut skid pans, a marulen and a wakefield day). This car has travelled ~4000km since i owned it.

Anyway it's a:

1993 Nissan 180sx

its nissan pearl white

5 speed manual sr20det

112 3xx kms

Rhino alarm system

Rego included till july 2011

Exterior:

Can come with either a full vertex kit, or

CA front bar, genuine nissan aero skirts and vertex rear (CA bar and skirts are a shade different)

White bonnet for street, and carbon for track (though I just ran carbon everywhere)

Wangan ducktail boot spoiler,

D-max rear window spoiler

Raybrig Headlights with 6000k HID kit

clear indicator/Parker lights

Type X rear lights with clear centre lights as imported from japan

Clean paint in awsome condition for age (always garaged)

Boot spoiler holes welded and bogged

Front and rear guards rolled to suit wheels

Interior:

Mint interior aside from dash having one crack, but above cluster, so not as noticeable

Mint S15 front seats, with bride pillows

Nardi wheel (with HKB boss kit and working horn) this wheel was a present off mrs and will keep. have other wheels to choose from

Apexi turbo timer

Apexi 60mm boost gauge

Midnight mods short shifter

New black gear boot

Momo gear knob

Digital climate control with air con that was working until vent got stuck (there is article on here how to fix, just havnt got around to it)

Genuine 180sx floor mats

Stereo:

am not a big stereo man, but sounds clear and quality

Sony explode head unit

some decent front speakers

6x9's in rear

Engine:

T28bb turbo, running 12 psi on a greddy boost controller, (however this will not come with sale either as it was also a gift, so has a turbosmart boost tee)

3inch split xforce dump pipe, xforce 'flex' front pipe to x-force extremely high flow cat (hollow)

3inch cat back exhaust which i just spent another $350 to get it raised up as high as possible

Hybrid FMIC and piping and Bov

Exedy heavy duty clutch

ACL bottom end race bearings throughout bottom end, installed by a well respected engine builder.

Gk-tech new radiator overflow bottle

Custom 3inch stainless intake pipe with HKS mushroom filter with new genuine element, hidden in standard air box

Shoes and suspension:

16 x 8, zero offset xxr's with 205/50's

Moonface coilovers,8/6 spring rates (jap brand and the best i've owned, cost the previous owner $2500 new)

New Ikeya formula tie rods

Primal Garage knuckles (hands down the best mod i've done, so much lock and zero bind)

mismatched castor rods (JIC and Tein.. had JIC and they pulled me up on one rose joint when getting regoed so put in a spare Tein one)

D-project toe rods

D-project rear camber arms

D-project traction rods

Whiteline front strut braces

Whiteline rear strut brace

Vented and slotted rotors front and rear

EBC greenstuff pads

4.11 locked diff with spare 4.11 viscous lsd + shims

Will get more pics asap...

MY180sx.jpg

photoshoped180sxpicforsalead.jpg

wakefielddrift.jpg

180SXpic4salead.jpg

i've never been hassled, defected or sent to emissions in this, though it is definitely not legal height.

Just been serviced with new oil, coolant, oil filter, gearbox oil, etc

Car drives and feels smooth, come and have a look.

No joy riders please.

it comes with a pair of 15 x 8 xr4's (seen on rear in pic 3), and a pair of the same in 15 x 7

...both with -6 or -8 offset. and a brand new pair of tires in 195/55

also parts can be taken off to reduce price if buyer wants.

PRICE: $12k ono

Located in Wollongong, about 1 hour south of Sydney

NO SWAPS SORRY.

Happy to help send interstate if need be.

ALSO I WILL NOT STRIP THE CAR UNLESS THE BUYER DOESN'T WANT A PARTICULAR ITEM

Contact: Tye 0421907656

Link to comment
Share on other sites

  • 2 weeks later...

price update:

~11.5k with everything, including nardi and boss kit and detachable boss + 4 X SSR XR4'S i used to slide on, both body kits (except boost controller, cause thats already out and boost tee is in) + all spare stock parts (shitloads)

~10.5k without steering wheel/detcachable kit (comes with another wheel) or xr4's

~9.5k same as above and bring your own rims, + only 1 of either full bodykit

~9k same as above and only one bonnet of your choice (carbon or white)

can do cheaper again with stock taillights and/or minus some adjustable suspension parts...

Edited by AE71GZE
Link to comment
Share on other sites

Its as clean as factory paint comes on one of these.

And Toddo28, if you are serious, pm or call me as this would not be that hard to get registered (I have pretty much every stock part in case i ever was defected), motor would pass easily, exhaust it quiet, and I can raise it to stock height with the coilovers. I can drive it or freight ....?

more pics and price reduced IN NEW THREAD...

http://www.skylinesaustralia.com/forums/topic/353733-180sx-perfect-for-track-andor-neat-daily/page__p__5667889#entry5667889

Mods, Please close this thread!!!!

cheers Tye

Edited by AE71GZE
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Big claims here.  Any links up on the website ?   
    • If your HP goal is reasonable and you are not drifting. Buy a new R34 box.  If the above is not true, buy a wrecked R33 box and put a gearset in it.  CD09 are not as strong as you think and the cost of / mess around of the conversion puts you in gearset territory.    Also the deal above is awesome,, get that  
    • Just got back from a little hands-on with a G58 Baron....I was thinking about this... ..best I can figure it, that pinny was tail-ended ...I didn't really think about the wiring, because all that mattered was the tank and pump cradle (I think I mentioned the pump itself I couldn't vouch for)...which didn't matter, as you said you'd be replacing the pump anyway.... ...'for some reason'....and I imagine this is the panel shop's doing... they've replaced the cradle wiring with a metre of 7-core trailer loom, and attached the loom plug (from a different car) to that. The actual cable run from the top of the pump cradle, to fuel pump harness end in boot, is maybe 60cm in length...so I've no idea why they did this... ....the connector in the boot of the pinny, is not going to help you here...because in theory, it should still be present on your car. On top of that, because they've done what they did, we have no idea which colours of the trailer cabling, have been connected to what on the fuel pump cradle (pump +/- , shield, fuel guage/low-level senders)... ...this means, best approach is to remove the pump cradle, and re-work it now ...not later. That is, if you were going to replace the pump, do it, replace the soft lines at the same time...and sort the wiring out (replace that trailer cable with the wiring loom off your old cradle)...
    • Well, maybe not. The main feature of Chinese manufacture seems to be incredibly variable quality, coupled with an apparent willingness to find a way to see even the stuff that fails QC. So the military could still take the cream of the production run and somehow sell the "sellable but not really useable" stuff to the stupid round eyes on the other side of the world.
    • Have you adjusted the clutch pedal rod? You can wind it in to shorten it. Just can be a cnut to get to.
×
×
  • Create New...